Brinks 7100B Two Head Flood Security Light, Bronze

I needed to replace an older flood light mount that was in a soffit under the corner of my house's roof. This was an easy install. The hardest part was using the ladder to get to that fixture. A couple of wire nuts and some screws to mount it, and we were good to go. From the look of this it should last a long time.

easy to put up.light weight overhead

This 7100b double flood light is ok, however be aware It is made of plastic. The foam gasket could be slightly larger to make installation easier.. to make it easier I placed 4 or 5 small drops of Elmer's glue around the inner lip then positioned the gasket. I let it dry for an hour.. that kept the gasket from slipping during installation.

Well I tried the metal ones that are more expensive and they corrode and fall apart..I went back to plastic as they are cheaper and last just a long...

Product listing says "bronze" everywhere. But it's not bronze -- it's the cheapest, thinnest plastic you could imagine.Yes, I know "bronze" can also be a color ... but if you use such an ambiguous term, that you know may be understood to be something other than the color, you have an OBLIGATION to disclose the materual.You wouldn't try to assert "stainless steel" or "brushed aluminum" or "copper" the same way.

Works good, will buy again

I'm often confused about why some brnads license their name out or take royalties for using their branding. Often the brand name which has a high value is diminished when shared with inferior products.This is a cheapo low-end light and really should have just been left called a generic flood light. The included instructions were sparse, the parts were flimsy, and the tightening nuts to hold the angles of the lights were loose and slips.For the price it's okay, but when you lend a good brand name to it, instead of enhancing the brand you make consumers trust you less and dilude the value of your brand.

very bright light. the sensor is hard to adjust.

Great replacement for an old light or new install. Works just as described. Recommend.

Installed easily. Works well.

Great price, ruggedized material, great for wet weather. Two plugged holes let’s you add a motion sensor module and a third light. I pulled out the motion sensor from an older halogen fixture and easily added it to this fixture. Good quality metal bracket included which you may or may not need to use depending on the box you are mounting on – if box has screw holes in upper left and lower right then you can mount this directly to box without included bracket. I installed two of these on two different type boxes and in both cases the fixture mounted tight around rim of box. Plastic lock nuts but they are rugged enough. If you use heavy/glass PAR38 floods they will weigh the lamp sockets down some but tighten the lock nut well and it will be fine. Happy with this purchase.

Good price , but made of plastic. Had difficulty mounting properly as holes didn’t line up exactly and weather gasket nearly impossible to get seated properly when installing. Used as a security light over my garage. Given the difficulty in getting it properly mounted and sealed it is probably best used in areas protected from rain.

Replaced an old rusty fixture with this one and it looks like a nice upgrade plus the bronze matches the colour of our new porch railing !