Decal Mods2008-2016 Hood/Grille Letters Inserts Inlays Decals Stickers for Ford Super Duty F250 F350 F450 (2008-2016) (Thin Decal) - CB (Black Gloss)

I agree with others that these are best installed using the wet method. I tried to stick them dry at first but got much better results using soapy water.Step 1: Clean the area where the inlay stickers are to be placed. I used alcohol and some lint free cloth. You can just wash with soap and water and wipe dry. The cleaner the better.Step 2: Mix up a solution of soapy water. I used approx 1 TSP of liquid dish soap to 1 cup of water. It doesn't really matter too much on the ratio. You just want a little soap in the water to make it more slippery.Step 3: Spray the soapy solution using a spray bottle onto the vehicle and the back side of the first sticker. Apply to your fingers as well. Apply liberally.Step 4: Place the sticker into location. It should be able to slide around on top of the soapy water solution. Get it to where you want it and then gently hold one side and rub your finger across the letter. Imagine that you are squeegeeing the water out from under the letter. If it still moves around a lot after placing it, then just get it into the correct placement and let it sit there to dry.Step 5: Keep on progressing to the next letters.Step 6: Return the the first letter which should have had time to dry and press and squeegee it more to make sure it is adhered fully and at the edges.Step 7: Enjoy your new look.I really like the black "Super Duty" lettering on the tailgate of my white F350. I also added white lettering to the silver front grill. The combination really looks good to me. I consider this an inexpensive way to really add a nice looking change. They can easily be removed later if you get tired of the look.It is great that they include double the letters so that you have 2 chances to get it right. Or that you can apply it to both the front and back. Good quality vinyl with plenty of stick. 5 stars.

Quick and easy to install and look great. I'll be doing the tailgate as well.

These decals went on easy and aligned perfect with the trucks factory super duty indentations. Someone said that the U was miss-formed. That cant be further from the truth! At first glance when you open the pack it appears the letters are skewed and that they look warped. If you look at the indentations on the grill they are rounded with the grill. So the letters match this so they appear warped when in the pack and flat but once stuck on they curve with the grills indentations to look perfect and un-warped. Its like looking at a 2 dimensional shape in a 3 dimensional world at first. They do line up with the indents perfect very factory looking. Not sure why Ford does not offer this as a factory option. It does appear that this company makes these themselves under license from Ford but not necessarily a ford factory product, but hey I could be wrong but who really cares. They are made of high quality and easy to install with Windex. Windex is like magic for placing stickers, reminds me of my old model car days as a child. Once the Windex evaporates the sticker is permanently adhered or until you force a removal which I wont.

First of all, these are for the GRILL and NOT for the TAILGATE. At least on a 2016 F-250, anyway. The letters are SMALLER on the grill. Shipping was relatively quick. Arrived in 4 or 5 days. The vinyl is very thin. That could be good.....or bad. Maybe because they are so thin, they will stick better? I think if they were a little thicker, they would be better. But because they're so thin make sure the surface is super clean or any little, microscopic piece of debris will show through the vinyl once it's stuck on. And be careful not to let them stick to themselves. You'll never get them apart. I ruined an 'E' and a 'T' like that. Fortunately, they do send two (2) sets of letters for just such a bonehead mistake. The letters are not 'perfectly' cut, but good enough...as long as you don't look too closely at them once they're on. I did clean the surface really well with denatured alcohol, then sprayed a glass cleaner (Invisible Glass) on the surface prior to sticking them on. They won't slide around when aligning them, but they will pull off easier if you need to re-adjust them, which I had to do a couple of times. In summery; It's a decent product but could be better. Relatively easy to apply. Looks good.

Great

I installed these about 2 months ago. They really highlighted the front of the truck. Use the soapy water method to apply and make sure the surface is cleaned with alcohol before applying. Have held up very well so far. Application is key when applying these!

These are stickers and were very hard to put on with even 2 people. The stickers are very thin and will fold up and mess up quickly. I guess that’s why they give you 2 sets.They don’t fill the whole lettering on the grill either. For the price it was a horrible purchase because they can probably make them for less than a dollar.

you get 2 sets of decals

Came with 2 sets...not just the one

Great product!! Shipped fast and looks great!

les lettres ne sont pas de la bonne dimension!!! il ne rentre pas dans le moulage de la calandre!!!👎🏼pas bon j’ai demandé remboursement... aucune nouvelle du vendeur!!!!

this was for the specified truck, but the product was below expectations and had a poor fit

Looks ok from10 feet back. But didn't fit the cut out anywhere close. Will end up removing it and getting a vinyl supplier to do it properly