VKE 5" Inch Dryer Vent Cover – Outdoor Stainless Steel Grille with Moving Flaps – Fits Only with Metal Ducts for HVAC & Dryer Systems

VKE 5" Inch Dryer Vent Cover – Outdoor Stainless Steel Grille with Moving Flaps – Fits Only with Metal Ducts for HVAC & Dryer Systems

Q: is this vent strong enough to hold up to a 2 horse power dust collector. It’s roughly 1400-1500 cfm?

its stainless steel so i do not see why it would not.

Q: Can this be powder coated?

I just went outside and looked at mine. I have to wonder why anyone would want to change its' color. However, It would have to be disassembled to paint it. Thee is a metal rod and a spacer on the sides of each louver. I cannot tell whether the spacers are metal, ceramic or a very hard plastic. I suspect that, as and assembly, the unit would not work well after cooking the paint job at 400 degrees F for the appropriate amount of time. It doesn't cost that much. Try one and see what happens. I like the look of stainless steel.

Q: What size are the exterior mounting screws? I want to get the right size toggle bolt for the back.

Don't use toggle bolts Stainless wood screws #10 x 1"

Q: I need a dryer vent cover that has screws with 5” distance between them. The dryer vent is 4”. Will the 5” version of this dryer vent work?

The answer is both yes and no. Any vent will work if it matches up to the ductwork it is mating with. A five inch duct does not fit into a four inch duct or hole in the wall. You will have to make an appropriate adjustment for it. The screw holes are six and five eight inches apart. Also, I have not seen a vent cover that needed to be attached with screws I used silicon caulk around mine and into the screw holes as well. Even my builder only used caulk when he installed the original plastic vent 10 years ago and it was a chore removing it from the wall. Ditch the screws. This is not just a vent cover. About 12 inches of duct pipe is permantly attached just like the plastic ones. If you just want a cover, you will have to cut it off with a tin snips.

4.5/5

Product ID: 349113566

Secure Transaction

Details

Brand
calimaero
Colour
Steel
Electric fan design
Exhaust Fan
Power source
Corded
Style
Industrial
Product dimensions
19.5D x 19.5W

🐾Animal Protection

🌧️Weather Resistant

🛠️Easy Installation

Frequently Bought Together

calimaero® VKE 5" Inch Dryer Vent Cover – Outdoor Stainless Steel Grille with Moving Flaps – Fits Only with Metal Ducts for HVAC & Dryer Systems

VIKITON 5 inch Hole Saw with Arbor for Metal Wood and Plastic, 127mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

PLG2SUPT 5” HSS Bi Metal Hole Saw Cutter for Wood Drywall Plastic Aluminum Mild Steel Iron Metal Stainless Steel Heavy Duty Hole Saw Bit with Arbor

Description

🔒 Seal the Deal with Style!

SEAL THE DEAL - Crafted from high-quality stainless steel, this vent cover ensures a tight seal with its rubber gasket, keeping your space protected.
EXPERT SUPPORT - With over 40 years in ventilation, our customer service is ready to assist you with any questions or concerns.
SMOOTH OPERATION - Designed for low air volume flows, the easy-moving lamellas prevent cold air from sneaking in, ensuring optimal performance.
AUTOMATIC DEFENSE - The louvered flaps close automatically, safeguarding your HVAC and dryer systems from unwanted pests and weather elements.
HASSLE FREE SETUP - Installation is a breeze! Simply insert the nozzle into your metal duct and secure it with the included stainless steel screws.

The calimaero® VKE 5" Inch Dryer Vent Cover is a premium outdoor stainless steel grille designed for metal ducts in HVAC and dryer systems. Featuring anti-draft gravity flaps, it protects against animals, odors, and weather while ensuring easy installation and smooth operation.

Specifications

Brand	calimaero
Model Number	4054503006089
Color	Steel
Product Dimensions	7 x 12.5 x 18 cm; 199.58 g
Power / Wattage	2 watts
Material	Stainless Steel
Special Features	Stainless Steel Grille Dryer Vent, Easy to Install, Moving Lamellas, Dryer Vent Cover Outdoor, Exterior Wall Vent Moving Flaps
Item Weight	200 g

Have a Question? See What Others Asked

is this vent strong enough to hold up to a 2 horse power dust collector. It’s roughly 1400-1500 cfm?

Can this be powder coated?

What size are the exterior mounting screws? I want to get the right size toggle bolt for the back.

I need a dryer vent cover that has screws with 5” distance between them. The dryer vent is 4”. Will the 5” version of this dryer vent work?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

5326₴

Duties & taxes incl.

Ukrainestore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Pooja R.

The customer service exceeded my expectations. Perfect for buying products you can't find elsewhere.

1 week ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App