Amazon Brand -Eono Plant-Based 3D Printer Resin, Low Odor 405nm LCD UV-Curing Photopolymer Resin for LCD 3D Printer Grey 500G

This is a great quality water based resin, which is ideal for LCD 3D printing. I got this for the hubby to use to make miniature gaming figures and he was very pleased with the results, as the detail on the prints comes out well, even with smaller figures.The printer resin is available in a range of colours to choose from, but they are quite expensive per bottle.

This resin comes boxed and contained in a solid aluminium can, the ring pull plug is an absolute nightmare to get out and takes some force to do, this occasionally leads to resin flying out the top so that’s not a great design in my opinion.The expiration date is plenty long enough and it flows well into the vat. I have managed to do quite a few prints with this now and I have to say I’m impressed with it so far. You can get some fine detail as you can see from my print test piece, knowing what I know now I could have dialled it it even better to get even finer details, but to be honest I was happy with the results of my initial tests. The resin is a grey colour and washes well in alcohol. I gave it a cure time of 4 minutes in my curing machine and that seemed to be good.I like it’s plant based credentials but this also means it will degrade over time, I have no idea how long it takes to degrade, it could be a year or it could be hundreds of years for all I know.I printed at 40 seconds initial layers then 8 seconds for each layer after and had good results.Overall I’m impressed with the quality of the prints I’ve got from it over the last month.

This resin comes packaged like all resins (at least the ones I have used), packed in an inflated bubble bag inside a cardboard box. The difference is that the bottle is aluminium with a plastic lid, unlike others that are all plastic. This gives it a premium look.In this case it is a plant based resin, which has some different characteristics than other resins.The two characteristics to evaluate in these resins are the smell and the print quality. About the smell, it is not as bad as other resins that fill the environment with a chemical smell. However, it still smells and sometimes you can't tell the difference if you spend enough time with the printer, which is something you have to reduce as much as possible. As for the printing process itself, it has worked as well as any other, leaving the pieces of good quality after washing and curing.As I said, it is a plant based resin, whose point to highlight more than the smell or quality is the impact on the environment. That said, this is one thing and another to put a picture pouring the resin on a hand without gloves. I hope this photo will be corrected soon. Remember to always wear gloves, face mask and be in a ventilated area.

I have an Elegoo Mars 2 printer and am always looking for new resins to try out. i don't normally use anything other than water based resin as the clean up after the print is a whole lot more difficult but i was curious to see whether there was a difference in output quality.This one is a plant based resin which means unlike the other resins that i have tried it uses degradable soybean oil as raw material which means it can be naturally degraded and is not harmful to the environment - note that as far as i understand it, this only applies once cured.In terms of performance, i used the settings as described in the description and had really good results. Good detail was achieved on my print. while it does say that it is low odour, i would say this is in the nose of the beholder. the smell isn't overpowering but is certainly discernible and is unpleasant. I would certainly still look to use it in a well ventilated room.Overall, however happy with the results of my print.

Comes super well packaged, in a box with a bubble bag, and the container itself is metal and opaque. Really high quality so far.Printing with this, on a Creality Halot (mono screen) I use 25s bottom and 4s per layer. The grey is awesome, looks really high quality when printed, especially for functional prototypes. It often doesnt need post processing on a resin printer and having a nice slate grey like this is excellent. The resin prints well, post processes well if needed, and is a good price.I had to drop this from 5 stars because of the reprehensible marketing pics as it promotes misuse of the resin. Resins are hazardous and should be treated as such. Low odour is stated alongside a crawling baby in the pic? Keep this well away from yourself, nevermind away from babies! It shouldnt be anywhere near a baby. Then the other pic claiming it's plant based so you can pour it on your bare hands? Always use gloves. This type of instructions/description has no place in handling hazardous materials. Please change the pics and description to instead promote the safe handling of a resin, plant based or not. People may take this literally and handle resin bare handed or have the printer in an unventilated area.

In my testing of this resin I’ve found it easy to work with, its of a good price imo when considering print quality and it cures very well. Although it is plant based it isn’t quite as odourless and hazard-less as the branding appears but for me it’s a step in the right direction. It does still need all safety measures taking when using and a well ventilated area to work in at the least.Otherwise I’d recommend it.

The resin performs as well as other brands and being plant based doesn’t impact its performance.It still smells like normal resin, is as toxic as normal resin and as dangerous as normal resin. As others have said the pictures showing bare hands and uncured resin, baby and opened resin is just plain badIt’s a little expensive for own brand resin but does perform well