Description: High performance LED replacement headlamp for any vehicle application requiring sealed beam type headlamps. It features high intensity 3w leds and is waterproof, sealed and extremely durable. These headlamps are perfect for replacing low output simple halogen sealed beams with more effective, efficient and powerful leds. Features Ð 1. Beam pattern: Ultra-bright long distance spot beam. 2. Size (single work light): 6.7 x 4.33 x 3.15 inch. 3. Light output: High beam 3200 lumens per assembly/low beam 1550 lumens per assembly. 4. Plug: Factory h4 plug with hi/lo beam function. 5. Color temperature: 6000k. 6. LED wattage: 45w (3w high intensity LED x 15 pieces). 7. Working voltage: DC 9v to 32v. 8. Operating amperage: 3a to 12v. 9. Moisture resistance rate: Ip67. 10. Average life span more than 30,000 hours of usage. 11. Made by oem approved & ISO certified manufacturers in materials that meet or exceed strict oem requirements. 12. Professional installation is high recommended vehicle fitment. 13. Fit for most vehicle with sealed beam headlights. 14. Simple plug-and-play design. 15. Each piece comes with 15-led sealed beam light and toughen pmma lens with h4 plug. 16. Made by high quality black aluminum housing with pmma lens. Please check with your local authorities for usage regulations. Applications Ð 1. Freightliner fld120 112 fld. 2. Peterbilt rectangular headlights 379 378 357. 3. Kenworth t800 t400 t600 w900b w900l classic 120/132 hk classic. Package included: 4 x 45w LED headlight.
K**.
See deer a mile away at night.
These lights are awesome. I installed them on a 94 Peterbilt. My Peterbilt has quad headlights. 2 for high beam and 2 for low beam. For the high beams it was plug and play, didn't have to change the pins on them. But for the low beams I had to switch all 3 wires to make it work properly. The directions where not very good. But with a test light and reference from the high beam I was able to figure it out. Definitely need to aim them down a bit. Very bright even on low beam.
J**R
Frightliner classic XL 2006, 5 star
Very nice set of lights 4 pc.. You have to rewired the lights which is very easy to do.. For my frightliner classic XL 2006.. You cut the wire for low beam the red wire is hot wire you tap the yellow wire with the red wire and see if the lights come on, if not keep changing the wires ever truck is different... For frightliner classic XL 2006.. The red wire / yellow. Then the black wire to the red wire and then the black wire to the yellow wire look at my pic I put up..
E**B
Very Bright
These light are great very bright, I do a lot of night driving in my peterbilt truck , it take a little time to do the low beams because you have to change some wires, and I had to adjust them all the way down so they would not blind oncoming traffic
S**B
Not a sealed beam headlight
Well they are bright , no doubt about that . The issue that I have is there should be no water or condensation in any of them. One is like a fish tank. Full of water
J**E
One of the best LED headlights on the market
These lights are really good on low beam it really do the job on roads where there are next to no road light. And on high beam wow! Their really bright you can see really clear down the road head of you. You will probably have to rotate the wires in the plug to make them work on your vehicle especially for the low beam side
J**E
Great Ultra bright headlights
perfect replacing High performance LED, Professional installation is recommended, but is not to hard try for your own. Each piece comes with 15-led sealed beam light and toughen pmma lens with h4 plug. The light is Ultra-bright. Package included 4 x 45w LED headlight.
D**T
Fit great , but had to rewire plug.
Like others said I had to rewire the low beams but the high beams were ok. They fit the headlight buckets well on my 379 Peterbilt. I have not used them yet in the dark , I hope they aren’t too bright for oncoming traffic.
B**E
Know you wireing before hand, otherwise it’s not gonna be a walk in the park to hook up
Takes some tweaking but will fit, also takes custom wireing to eliminate all 4 on high beams. Only top for high and only bottom for low. These are not DOT approved they’re to bright and in Michigan u will get a ticket with all 4 on at once.
Trustpilot
1 month ago
3 weeks ago