zedfy RGB CCT LED Strip 24v 5in1 Chip 5 Meter Roll Adhesive Non-Waterproof Flexible Color Changing+Tunable White (2500K to 6500K) 5050 32.6W Per Meter (96 LEDs per Meter)

I've been working with LED strips for many years of all types, and this is the best one I've found so far for output. The photo shows the initial turn on of both warm+cool white simultaneously with a properly paired HLG-240H-24A Mean Well power supply. The adhesive said 3M on it, but don't rely on that alone long term. When I ran all 3 (RGB+WW+CW) at the same time, the strip got hot enough to lose adhesion. I recommend you use this with a proper "aluminum channel" to help manage the chips thermally if you're going to max them out like that. Add an extra adhesive of some kind to ensure it stays up long term.The output is phenomenal given the LED density. I don't have a RGBWW controller, so I am just using a 10A RGB controller for now with RED, Warm White, and Cool white hooked up. The different "colors" of the controller give me a choice of any level of white balance, and I'm able to mimic daylight pretty well with it. Go for it, but know you need to support it thermally with aluminum channel and have a good power supply!

This RGB strip is nicer than most - there are more LED cobs per foot than any of the others I purchased recently, and they're plenty bright enough for pretty much any indoor application. You end up with about 15 ft of lights plus a few inches of wire on one end to integrate into your power supply and controller.The adhesive's function is somewhat dictated by the surface you're attaching it to - if you're putting it on the underside of a cabinet for example you're going to want to go through an additional process of either lightly sanding the area that you're attaching it to or adding extra glue in a few places to help keep the strip in place.Cutting the strip to go around corners or add length is easy - every six cobs there's a line marked with copper pads. You can just cut along that guideline and solder new wires to the pads.The construction is nice - it's flexible without being weak and the solder joints are all well applied. I didn't have a single bad LED on the strip.All in all I would recommend this, even though it's a little more expensive than other strips.

Good LED density and a variety of functionality with a broad range of options color wise, but this 15 foot long (5 meter) LED strip does NOT come with any power source at all, or any of the multi-pin connectors you need to connect it to the Not Included power source. Those both cost money, and the product description page recommends certain brands. If you have to cut it, you have to re-solder the new wires and new power source you will have to purchase to the copper ovals on the cut line yourself. You will also have to likely secure the strips with additional adhesives or mechanical means once this strip heats up and falls off from the sparse adhesive supplied on the back of the strip. For this price, $60 at the time of this review, and especially if the lights are for a kid’s room, there are much, much cheaper and more complete options. I would save this for a pro installation under a bar top or in a cabinet or something. Not for do-it-yourselfers and weekend warriors.

The LEDs are closer together so the light looks smoother than a lot of models. Really happy with this one. Installing on a high ceiling so we wanted the extra quality and don’t want to replace it soon. It looks great. Very nice quality.

I got this for my son's room. He has a ton of friends who have this all over their room and has been begging for it around his bed and around the top of his ceiling. It was easy to put up. The colors are great. Easy to change. Bright enough but not too bright if he wanted them to be on at night. Very easy to install. Stay put. I would recommend them.

I haven't had a chance to use these yet. I'm going to run them around the top of my camper when it warms up. The strand is long enough to meet my needs, and the wiring looks easy enough. The adhesive back should make installing easy. I will update with pictures and more info when I get them installed.