Supreme Suspensions - 2pc Set [Silver] 2" Hub Centric Wheel Spacers for 1999-2023 Chevy Silverado & GMC Sierra 1500 - BP: 6 x 139.7mm / CB: 78.1mm / Studs: M14 x 1.5 [4 Tire Valve Caps Included]

Excellent machining and anodizing. These are very high quality spacers that fit perfectly to my hub and oem Silverado wheels.

Quick and easy installation.

This review will have two versions one long and one short.Short version: Well-made product that I am very happy with. These spacers are not the most expensive on the market, however they are not the cheapest either. These are sold from a seller that makes everything here in the USA. Lost one-star due personal reasons. If wondering about rubbing issues, these did solve my upper control arm rub issue. 2000 Chevy 1500, 4” suspension/ 3” body lift. Running 33x12 tires with positive 18 offset.Long Version:Packaging: I was very impressed with the packaging I received these in. They came in one large box that was tapped all around for extra strength. Inside there were two boxes with cardboard paper shoved around so nothing shifted during shipping. Each interior box contains two spacers individually wrapped to prevent scratching. You can tell they take time and pride in their product, they do not toss them loosely in a box and send them out the door.Material: These spacers are made from a billet aluminum material and appear to be very strong. I think these spacers are poured into a mold when they are made as I do not see any weld beads around the hub centric ring. I do live in the salt belt (Midwest) and after a month and half of driving in the brine and salt, they do not appear to be rusting or corroding.Dislikes: Of course, not everything is perfect, there are a few things I didn’t like about these spacers. The first thing is more of a personal preference thing, and that’s that they didn’t have the silver option in the 6 bolt 2”. Black is fine, and you can hardly see them through the wheel, but with chrome wheels I would rather see a little bit of silver, not black. The other problem I had with these spacers is the bore hole where the stock studs go though is a bit tight. The supplied lugs are 19mm and a half inch drive socket [at least mine] is just barley bigger then the bored hole. I had to use a 3/8 drive socket and a smaller torque wrench. Again, not a huge deal, more of annoyance type of thing.Summary: All in all I am very happy I bought these spacers, and I would recommend anyone and everyone who wants to run wheel spacers to purchase these ones. I was very happy with the speed of shipment and the condition I received these in, and most importantly I love the stance these gave me.

These are great quality, but from my application they were not good enough. Had very bad vibration and shaking at highway speed. If you are using these for off road or low speed traveling get them.

So I was worried about buying spacers. After reading so much horror stories online, not for Supreme Suspensions brand, but still. I ordered these anyways because I feel I trust this company as I had a 98 durango I ordered lift shackles for it from them and even though it’s a completely different part they have some real quality. I really needed some spacers for my 07 Sierra nnbs because after my lift install the aftermarket wheels I have were rubbing on the new upper control arms, so instead of getting new wheels I figured I’d save some money till I change wheels and try spacers. I got 2” so I didn’t have to mess with cutting the studs down. Cleaned up my hubs and pulled the couple factory rings I still had on. Mounted the spacers with loctite and torqued to factory specs. Sunday I hit 100 miles with them on so pulled the wheels off to check the spacer lugs to make sure nothings backing off and the spacer studs and all is good so far! I definitely would recommend this company and their spacers for sure! Great quality and fast shipping!

Spacers get a really bad rap with an instant "those things are dangerous" attitude. If you get quality spacers this is far from the truth. Not only are these spacers billet aluminum and not cast, these spacers are also both hub and "stock wheel" centric. If you have aftermarket wheels you may need to get a ring for them to remain wheel centric and may need to trim the lug nuts unless your wheel has pockets. The tolerance was spot on! They where neither difficult nor easy to slide on the hub and same for the wheel. Once the lips where lined up and pushed into place the whole wheel/tire was supported with no pressure on the the lug nuts. Install was super easy. Use red locktight on the spacers, torque to 140 ft/lb, install wheel and torque to 140 ft/lb, move to the next. Check torque every oil change and you are golden. I run a 2" level with 275/70R18 Nitto Ridge Grappler's. These spacers really gave the stock wheel/Tire combo the aggressive stance I was looking for. I do get a very slight rub on the inner fender liner at full lock in reverse but its very slight and could be fixed by zip tying the liner or adding another inch or so of lift. I would definitely recommend these spacers to anyone.

Bought these for my 2018 Silverado z71. These fit great and i didnt have to cut down my factory studs with my stock 20" wheels. Quality seems top notch, ive put about 500mi on them with no issues. I had to use these because i installed a motofab 3" leveling kit with new upper control arms, which do not work with stock back spacing. These spacers gave me the clearance i needed plus added a little bit of stance to the truck. I was worried it would be too much, but it ended up being perfect.

Based on feedback from several forums, I ordered the 6x5.5 78.1MM hub centric spacers for my 2019 Ram Rebel. They fit the truck well, but the bore for the Ram is 77.8, not 78.1. The fit was a little too tight, as I could not pull the wheels off by hand to recheck the torque after driving the first 100 miles. Does Supreme Suspensions offer a 77.8 bore hub centric 6x5.5 spacer the 5th gen Ram? Otherwise, this product looked great and appeared to be well constructed.

They look great! I had to trim maybe a half inch...if that off of my studs on my Silverado. They don't have the Supreme Suspension logo on the side of them like the picture shows but that is very minor detail (honestly prefer it without that on them). But it does come with everything else pictured.

drove these puppies of a 4 ft ledge in my 7000lb silverado and they are mint.

Fit well, Easy install

merci