Our SUPPLY 3D vacuum-sealed 3D Filaments are made from raw black pellets. Soft PLA is a flexible 3D printing material that is resilient and elastic. Allowing you to make prints that can bend or flex, such as phone cases, toys ,displays. The imported raw materials not popping the waste, the recycling materials to insure 100% pure forming without edge. No bubbles, printing and forming effect is very smooth and delicate with accurate colors. Manufactured and tested under strict guidelines to give the best printing effect. Will not plug the heat, will not squeeze cause of the materials shortage. This 1.75mm diameter filament is compatible with most 3D printers currently out on the market.
E**E
The filament print fine. I printed with the nozzle at 205 degrees ...
At first I was hesitant to purchase a brand that I hadn't heard of but decided to risk it anyway. The filament print fine. I printed with the nozzle at 205 degrees Celcius and the bed at 65 degrees. I was impressed and it looked as good as the hatchbox that I usually purchased. This is the black supply3d filament print compared to my hatchbox translucent. Printing at 210C gives it a bit of a shine if that's what you prefer but I usually print at 205 to lower the possibility of stringing on detailed prints.
A**R
Prints decent, but had too many breaks in fillament so had to quick with over half a roll left.
material is decent when it's printing, but had this particular roll of black break on me 4 times. Luckily I caught the breaks at the beginning of a print so my machine wasn't running without printing. . So I'm not sure if I got an old roll or not. I'm not even half way through this roll and had to stop using it and switch to another brand. The area that breaks is definitely hardened and brittle, so not sure if it's age or caused during the manufacturing process.
P**Y
Four Stars
Item works as expected and delivered on-time.
A**R
Looks great and no problems so far.
I had no problems with this filament, there are many prints I have done with it on my CR-10 I know pictures are not great but the prints are quit smooth. I printed these at 220/60 for nozzle/bed temps @5omm/s. I have not had any problems yet and I have printed off about 25% of roll so far.
V**V
make sure you keep it dry
Good filament. It got a little brittle when it was left out of a bag for few weeks so make sure you keep it dry.
A**T
But maybe it's your jam to have your PLA break easily.
This filament has a matte finish. It also is very weak compared to every other PLA I have used. But maybe it's your jam to have your PLA break easily.
O**S
Very good quality!
I used this filament on my cr-10 with no issues. I will buy more of this filament.
A**R
Great product.
Great product, on my second roll of both white and black. Never a problem. This is my go to filament from now on.
Trustpilot
3 weeks ago
2 months ago
