• Handheld unit combines a two-channel digital oscillo for viewing electrical signals with a digital multimeter for measuring voltage and resistance.
• Real-time sample rate is 625Ms/s for 60MHz models, 1.25GS/s for 100MHz models, 2.5GS/s for 200MHz models, and 5GS/s for 500MHz models, and record length is 10,000 points per channel for acquiring detailed waveforms.
• Zoom function, three math functions plus FFT, and automatic and cursor measurements for analyzing waveforms.
• 6" color LCD shows up to four readings or waveforms simultaneously.
• Meets EN and IEC 61010-1:2001 and 61010-031:2002+A1:2008, ANSI/ISA 61010-1 (82.02.01), and CAN/CSA C22.2 61010-1-04 safety standards, and is rated CAT III installations to 1,000V and CAT IV installations to 600V.

Size:60 megahertz, 5.8ns Rise time with Kit The Fluke Meter 190 series is a handheld electrical test device that combines a two-channel digital oscillo for viewing electrical signals with a manual- and auto-ranging digital multimeter for measuring AC and DC voltage to 1,000V, AC/DC voltage to 1,000V true RMS, and resistance to 30MΩ. The unit can also measure power for single- and three-phase systems, displaying the total power (watts), apparent power (VA), reactive power (VAR), and the power factor (PF) to determine how efficiently an installation uses power. The oscillo has a real-time sample rate of 625Ms/s for 60MHz models, 1.25GS/s for 100MHz models, 2.5GS/s for 200MHz models, and 5GS/s for 500MHz models, and a record length of 10,000 points per channel for acquiring detailed waveforms. A zoom function magnifies waveforms up to x100, three math functions—add, subtract, and multiply—plus FFT (fast fourier transform), and automatic and cursor measurements allow an in-depth analysis of waveforms. Edge, pulse width, video, and N-cycle (burst) triggers allow isolation of specific signals. The oscillo's advanced automatic triggering recognizes signal patterns and automatically optimizes triggering, timebase and amplitude settings. To aid debugging, the pass/fail testing compares a live waveform to a reference waveform and can be set to store either waveforms that match (pass) or do not match (fail) the reference waveform. The 5,000-count multimeter has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. The relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, and the data-hold function freezes a reading on the display to aid documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s diodes are working properly. The unit automatically stores the 100 most recent screens in its internal memory which can be accessed by the replay function. Additionally, the oscillo has a recorder that captures from 6 seconds to 48 hours of waveforms and stores up to 30,000 data points per channel. Its TrendPlot chart function graphs the minimum, maximum, and average readings over time from 60 minutes at 5 seconds per division to 22 days at 30 minutes per division. Additional specifications ( https://images-na.ssl-images-.com/images/G/01/BISS/OscillosMix/FlukeMeter190series.usermanual.pdf#page=118 ) include a rise time of 5.8ns for the 60MHz models, 3.5ns for the 100MHz models, 1.7ns for the 200MHz models, and 0.7ns for 500MHz models, and various triggering features. The unit has a 6" (53 mm) color LCD with a resolution of 320 x 240 pixels for viewing waveforms and measurements, and an LED backlight for visibility in low light. It can display up to four readings or waveforms simultaneously. A multimeter is an electrical testing tool for measuring multiple properties of an electrical circuit to verify proper operation or diagnose problems. The oscillo has a USB host port for storing data on a 2GB-maximum flash drive and a USB device port for connecting to a compatible PC for storing and analyzing data with the included demonstration version of FlukeView software (a full version is included for models with kit). The software is compatible with Microsoft Windows 2000 and beyond operating systems. The unit operates on a rechargeable lithium ion battery pack or a 120VAC, 50/60Hz adapter/charger (both included). When operating on battery power, it automatically shuts down after 30 minutes of non-use to conserve battery life and has a low-battery indicator that signals when the battery needs recharging. It meets European Standard (EN) and International Electrotechnical Commission (IEC) 61010-1:2001 and 61010-031:2002+A1:2008, American National Standards Institute and International Society of Automation (ANSI/ISA) 61010-1 (82.02.01), and CAN/CSA (Canadian Standards Association) C22.2 61010-1-04 safety standards, and is rated for CAT (category) III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation, and CAT IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment. It has European Conformity (CE) marking and is Ingress Protection certified IP51. It comes with two voltage probe sets, a set of test leads, FlukeView software, a USB interface cable, a rechargeable lithium ion battery pack, an AC adapter/battery charger, and a user manual. The Fluke Meter 190 series is available with and without the SCC290 kit. The kit includes an activation key that unlocks the full-version of FlukeView software for storing and analyzing data, and a hard carrying case for storing the unit and its accessories. Specifications -------------- Display 6" (153 mm) color LCD with LED backlight Bandwidths available 60MHz, 100MHz, 200MHz, 500MHz Input channels Two Real-time sample rate 625Ms/s for 60MHz models, 1.25GS/s for 100MHz models, 2.5GS/s for 200MHz models, 5GS/s for 500MHz models Record length 10,000 points per channel; 30,000 points per channel in record mode Maximum AC and DC voltage measured (with probe) 1,000V Maximum resistance measured 30MΩ Installation rating CAT III, 1,000V; CAT IV, 600V Standards met EN and IEC 61010-1:2001 and 61010-031:2002+A1:2008, ANSI/ISA 61010-1 (82.02.01), and CAN/CSA C22.2 61010-1-04 safety standards; CE marking; IP51 Power source Rechargeable lithium ion battery pack; adapter/charger for 120VAC, 50/60Hz Dimensions (H x W x D) 265 x 190 x 70 mm (10.5 x 7.5 x 2.8 inches) Weight 2.1 kg/4.6 lb. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Oscillos are electrical testing devices used to verify the functionality of equipment that generates an electrical signal. Oscillos measure the voltage of an electrical signal over time, and display the measurement as a waveform in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and the time on a horizontal (X) axis. Details of a waveform demonstrate the signal over time. Most oscillos have two or four channels for inputting a signal. Some digital oscillos offer more than four channels, allowing channels to be dedicated to specific signals and applications. Bandwidth is the maximum frequency of a signal that an oscillo can capture. A constant image will display if a signal is shown at a high frequency. Oscillos may be analog, digital, or mixed signal. An analog oscillo directly displays an input signal as a continuous waveform, typically in a luminous phosphor on a cathode ray tube (CRT). A digital oscillo converts the input signal into a digital format and reassembles the waveform for display, typically on an LCD. A mixed signal oscillo (MSO) displays both analog and digital formats. Some oscillos can display more than one channel and type of measurement simultaneously. Some oscillos can capture waveform signals to memory, and recall them. They may provide real-time intensity grading, and may have the ability to adjust frequency of display. Oscillos can be powered with batteries or electricity, or may have a built-in generator. They are commonly used for testing, measuring, and inspecting in science, engineering, telecommunications, automotive, and electronics applications. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA. What's in the Box? ------------------ * Fluke Meter 190 series handheld oscillo/multimeter * (2) voltage probe sets * Set of test leads * FlukeView software (demonstration version for models without kit, full version for models with kit) * USB interface cable * Rechargeable lithium ion battery pack * AC adapter/battery charger * User manual * Hard carrying case (for models with kit)