Obokidly Upgrade Type DIY Racing Simulator Steering Wheel Turn Signal Wiper Lever Switch For Logitech G27 G29 G920 G923 Logitech Thrustmaster T300 (Upgrade Type-For G27/G29, Black)

I've been having a lot of fun with this on ATS. The insulation did take a min but the instructions were clear & easy to understand.

I cannot believe I've been using American truck simulator and euro truck simulator for 3 months without this. This completely adds a whole new level of immersion to gaming.I'm not gonna lie about the setup though, it was a bit tricky. I've said a few words that I haven't said in a while lol. But this is most definitely worth the trouble of putting together if you are into sim truck gaming like me. The company does provide a manual via AQR code which also contains links to step-by-step videos. That greatly helped. The only thing I don't care for on this whole thing is the push button start. If I tap the gas the truck starts up so that's usually what I use. It is pretty cool though. The greatest thing I dislike about it is the LED light stays on at all times, even when the computers turned off. It's not life shattering tho lolInitially I did have an issue where the retarder and blinker were not working properly. I spent 2 hours fiddling with it and almost gave up. And then out of sheer luck I switched the 2 ribbon cables around for the 2 modules on the control unit and it worked perfect. So, I supposed that's my fault, not following instructions carefully. So if this happens to you, just switch the cables around. They're both the same color and the same connector style so it's easy to switch them around by accident. I did wanna give a shout out to the company for answering back within 30 minutes of me emailing them. They were very prompt and willing to do whatever to help me out.I can't say if this is for you or not, but I will never play American truck simulator or euro truck simulator without this again. The immersion factor it adds is completely worth it to me. 100% recommend.

Warning do not buy this!!! The assembly process is awful and the whole thing feels cheap and flimsy on top of that the screws and stuff that came with it strip with almost no effort at all, wanted to contact the people who made this but of course there’s not a single area I can contact them… STAY AWAY FROM THIS, ITS NOT WORTH THE TROUBLE

The product works as intended but everything is 3d printed so if feels pretty cheap for the price, and my steering wheel is no longer straight, instalation was kind of difficult being that there's very little intrusctions on how to put it together besides the video, would I buy it again for this price... probably not with my steering wheel no longer being straight, but I'm enjoying using it

The media could not be loaded. First and foremost, ignore the wires in my pictures. My steering wheel setup is only for temporary use.The entire assembly itself is great. I love having the new buttons and ease of access to what I normally have to use my keyboard or gear shifter for. And the auto off on the turn signal is a wonderful touch.Keep in mind this assembly will push your steering wheel out much further. With that, the g27 is at an angle already. So adding this does raise it significantly higher.Following the instructions was easy. I used the video tutorial. I recommend watching it fully first as a few steps backtracked or required going back to make a change. At least on the g27.Onto its use. I use this solely for ATS at the moment. So it's not abused or beat on in any way. With that being said, during a turn I felt and heard a small snap in my wheel. Since then my wheel has had a small giggle to it. One of the screws in the cover has become logged in the top, preventing me from removing the cover to see where the issue is coming from. With the cover being 3d printed, I'm aware it can break if I attempt to force it lose. And to continue trying will most likely strip the screw. So unfortunately I am stuck with this issue for the time being.During assembly the main wire that gets connected to your wheel, was a hassle. One a few occasions I held my breath while trying to pass it through the pieces. Just be gentle and calm with it, it does feel like it may break/come lose when trying to push it through the holes.The bottom left switch under the turn signal can move up/down, and the end can be pressed in and spin. The spin is counted as a single key regardless of the way you rotate it.My only major con is the three screws provided to mount the g27 housing to the new adapter, did not fit. I was able to find replacement screws through my other hobby materials.The following is for the creator and anyone who likes more in depth context about the parts:What I'd like to see in future upgrades: 1-There is a lot of wasted space between the back of the wheel and the assembly. Even the shifting buttons clear the extended signals with a lot of distance. I'd love to see some of the length cut down. Though I understand this is a more universal set and some wheels may require that space. 2-Some of the wiring could be labeled better. The white and black wiring going to the turn signal and retarder switch are not labeled. I originally connected the backwards. The white wire is bent at an extreme angle and makes me weary of the longevity of its use. The black wire also does not have much room to move. 3-An ability for a tilt option. I understand this may conflict with the length suggestion. 4-Better connection points for the cover. Bumps and pockets could be used to align the cover pieces. Similar to using dowels in woodworking. Instead of solely relying on screws, which in my case allowed one to get stuck begin to become stripped. 5-Slightly longer connection wire. My pc is pretty close to where my wheel gets placed. Even then the wire does not have much extra room and prevents me from using the front USB ports. 6-Not a priority, but would love to see a key mechanism in place of the push button. Or create it as a replacement to the push button and sell it separately.

It was packaged very good all tight and air bubble. Comes with a quick guide that has a QR code to a full assembly video on how it goes on your wheel. It’s a game changer for sure. Cause like me I play ATS on a live convoy server with up to 128 players. As you can see in picture I bought the $175 they do not come with cover if you read people. The cover comes with the one for $240. You can still use a wheel hub adapter if you are using a different steering wheel like I am