YOUSU ABS-Like 3D Printer Resin 500g Grey, Less Fragile Tough 405nm Rapid UV-Curing Photopolymer Resin for LCD 3D Printer

I’ve only used this to print loads of items for the Gloomhaven & FrostHaven board games. Simple 28mm models of rocks, trees, doors etc, these were then all painted with acrylic paints.Even when cleaned in an ultrasonic bath with IPA and then fully cured under a UV lamp; the surface finish is 8/10, some patches of the models are strangely glossy. But all details were still perfectly formed.If you’re going to paint your prints - YES use this cheap resin.I’ll definitely be using this to print some Warhammer 40k proxy models.If you want 100% looking prints with a perfect finish, look elsewhere.Used on an Elegoo Mars 2 Pro. 25um layers.

The quality print is about the same as other resins I have used before. Anything that is 'abs-like' tends to be more rigid that the standard uv resin which seems to have more of a bend to the finished cure. Can't fault it has been durable so far and print quality is solid when it comes to details.The price is about right for the quantity. Useful as a test material for saving on the really pricy stuff. Overall happy with the product.

The price of this bottle is pretty standard, it's only 500ml. Maybe a couple of pounds cheaper, so I think I'll use it for those tests that always hurt my pocket when I use other more expensive resins.I like the metal pot it is shipped in.The print quality you get is good, as with every brand you have to find your print values. The red colour is, more or less red, quite light.The smell is intense so as always, keep the area ventilated.

This resin comes in a large metal bottle that contains 500g.I wanted a clean print so I wanted the white colour. This resin can be used with certain 3D printers and is easy to set up. It is alittle more sticky that other resin I have used in the past, making the cleaning process alittle more difficult and time consuming.

Resin - 500g - GreyDoes the job - strong smell but more robust.Will update after further use.

I purchased purple / blue ... but it looks like orange / purple once solid.Extremely disappointed.

Great resin, works just like the more expensive brands. Details are nice and crisp and its easy to clean. Supports remove nice and easy.

It is superb resin for any sort of miniature printing or more technical items where durability is key. I got 500ml grey resin in well packed box and secured screw cap. It is for me first time when printing with abs like resin but principal is exactly same.I started with normal exposire time on my Ender halot One resin printer with 40 seconds first couple layers exposure, then for 5 seconds on each layer. It worked well enough and didn't need to change it. There is very strong odour so make sure you use it in well ventilated room, it is nothing comparing to regular resin i was using before. Resin stick to bed with no issue and removing it was easy enought too. I washed it in my wash and cure from creality in 99% isopropyl alcohol and then cured for 10 minutes. Results are amazing, very clean print, smooth and in case of technical print, you can easily drill in it. I only print miniatures and figure so nothing of that will be use for me but very happy with results. Price is about right for 500ml.