anidees AI-Crystal-W Mid Tower Liquid Cooling, Gaming ATX Case w/Tempered Glass Side Window and Front Panel, White Interior, White LED Fans, E-ATX,360/280 Radiator Support - White Version

This is a great case. This was used in a rebuild of an i7-6700k machine that was previously in a Corsair Vengeance C70 after the original motherboard died and the front panel of the C70 started to wear out (loose jacks). The RGB fans are a nice touch, and pair really well with the tinted glass. My wife is a huge fan of this build.Pros:- Sleek design- Easy assembly/disassembly (thumb screws and sturdy plastic clips for the front panel)- Fan mounting points for days (3 120mm in the front, up to 3 120mm up top, plus 1 120mm in the back)- Great air flow thanks to the abundance of fan mountsCons:- The bottom of a standard ATX motherboard sits flush with the top of the PSU shroud. This means that there is no space to route cables up underneath the motherboard, meaning that you have to come in from the side to get to the front panel jumpers. Not a huge deal, but it does make the build look a little less tidy.- The front fan placement. These fans are mounted on the front of the metal chasis, covered by a removable tempered glass front panel. When the panel is installed over these fans, there is about 1/8" of clearance or less between the fan intake and the back of the glass. I have no way to measure whether this impacts airflow, but it would seem that the limited clearance might restrict the intake air flow.Over all, I would definitely purchase this case again. It is an absolute pleasure to build in as the panels all easily come off, giving you direct access to the metal chasis. The abundance of fan mounts also lends itself nicely to multiple AIO liquid-cooled setups. In this particular build, I have my CPU radiator exhausting out of the top-front with another anidees fan installed next to it.

Looks very good but lacks quality and structure. Not enough clearance in the back panel for decent wire management. Get single braided cables if you're going to go with this case. Other than that it's beautiful.

I never liked cases with side windows, always seemed stupid and childish to me, but this case caught my attention in a test from ComputerBase.de (german site) and I couldn't resist. I had a Lian Li in Germany, then moved to the US and made the mistake to buy a cheap case with a lot of shortcomings. Finally I have a decent, beautiful case again.First the bad things:- it is heavy - duh. If you want real glass you have to deal with some extra pounds. You also shouldn't move it a lot, it's still glass and can break. Mine came in perfect condition though.- on high setting, the fans are pretty loud, You won't notice that though if you're using headphones.- the space between the mainboard tray and the right glass panel is pretty narrow, you have to be careful with your cables. I have 2 SSDs mounted to the tray and the power cable is touching the glass. But I didn't have to apply pressure to close the panel, so I guess it's okay.- the HDDs (1 WD blue with 1TB, 1 WD green with 3TB) are by far the loudest parts of my system, I didn't hear them that loud in my last 2 cases. Also, they are a bit warmer (about 10°F) than in my last cases.Now the positives:- the fans are absolutely silent on the Low setting. No need to upgrade them or anything, Low or Off just doesn't make any difference. And the airflow is absolutely enough to keep my CPU, mainboard and graphics card cool, even after 2 hours of playing. You can add more fans or water cooling in the top AND the front, too.- PSU, CPU cooler and GPU are also nearly silent, as I wrote, only the hard drives are easy to hear.- It has a LOT of space for the CPU cooler (I got a EKL Alpenföhn Brocken 2 and there is about half an inch of space between it and the glass) and the graphics card, of course, if you don't use a water cooling system mounted in the front.- the cable management is excellent, apart from the 2 cables going to my MSI GTX 1070 Gaming X, you practically can't see any cable in the front. The cover for the mainboard power cable also supports the graphics card - very thoughtful.- the materials are very good, the glass speaks for itself, but the metal and plastic parts also feel pretty well made. No rough edges, the buttons have a good pressure point and fit well, the screws (all necessary screws are in the package) are okay too.- it just looks awesome. The LED lights aren't to bright to lit up the whole room (on low fan setting) and the RGB LEDs of my graphics card add a nice touch to that. As I wrote earlier, I never liked cases with side windows before, but this full glass case just looks elegant and is well worth the money.4 stars, because it's not perfect, but if you don't mind the narrow space behind the mainboard try, the high weight or the loud fans at high speed, you will love it. I would give 4,5 stars if that was possible

Great case for the $. Looks great, everything fit nicely, cable management was a dream. The only problem I have had with the case is that the front panel had multiple broken I am working on contacting them now to get a replacement sent. That has been my only complaint as of this far. This is a really nice case and looks sleek and modern. My water cooling setup should be here today and will make my build look even better. I cant wait.Edit: They have since replaced my broken front panel and the case has been great to to this point. Customer service was a decent experience. Thanks Anidees!! Had to up my review from 4 to 5 stars! Great case.

I like the case a lot, but it has flaws.Pros: quiet fans , fan controller, decently built, very sleek looking.Cons;1:So the fan are almost impossible to take out with out stripping the screws.2:Mounting any rad on top will make the dust filter uneven.3:tight fit for cable management.4:The fan installed in the back was installed with the power connector facing the furthest from the fan controller. I had to buy a 3 pin extender. tried to re-position the fan, but one fan screw is beyond stripped and can't be remove with out drilling it out.I would recommend this product if you don't plan on removing the fans. If you do make sure you use duck tape and screw driver method to remove the fan screws..Tech support kind of sucks. I emailed them to see where I can buy a replacement dust filter, after the first response. Nothing...

Very pleased with the Anidees, looks great, easy to work in and cable management went well. System is very quiet and looks expensive and professional. The supplier is excellent quick delivery and one minor question was handled quickly, recommended, R

Caja increíble. Precio ajustado, suficientemente​ grande para placas EATX. Buenos materiales y un 10 en apariencia.Una caja con la que no tenía excesivas espectativas y me ha sorprendido mucho. Estoy encantado con la compra.

Amazing! This case screams quality. Instructions aren't that great however it is so easy to figure out. Everything tucks away neatly, the provided fans are brilliant quality. So much room for modding and for adding even more fans! Highly recommended

Verbaute Hardware:FX-9590 @ 5Ghz (3x120er Wakü)Asus Crosshair V Formula ZGTX 960 Xtreme Gaming 4GB16GB G.Skill Sniper DDR3 1866erBe quiet! 630Watt Netzteil9x 2,5" 250GB Kingston SSD1X 3,5" Segate 4TB Festplatte#sehr gut Überdacht und echt sehr viel Platz# alle Kabel kann man sehr gut verstecken, extreme gut für Case Modding# Es haben bis zu 9 SSD Platten Platz (mit zwei Optional erhältlichen 3,5"Einbaurahmen für 2 Platten pro Slot und)# Es ist auch möglich 3 x 3,5" Platten einzubauen und 3x SSD Platten# Das Design/Optik ist sehr elegant und ansprechend, kennt man nur bei, sehr teuren Gehäusen# Am besten selbst überzeugen, man wird es nicht bereuen!!!! Ich traue mich mal sagen das es nur Beschädigungen in deie Retoure schaffen:-)# Das Gehäuse ist im Gesammten sehr Anwänderfreudlich und ist in vieler Hinsicht sehr gut mit Wasserkühlung Kompatibel von 120er bis zur 3x 140er#Die Hardware ist auch sehr kühl durch die gute durchlüftung max 46° unter LastKann es jedem nur empfehlen ein uschlagbarer Preis und dafür eine Top Qualität und für ein Midicase schon zu groß :-)

Ho voluto comprare questo case (la versione mid tower con le 4 ventole bianche) per la possibilità di montare radiatori fino a 360mm, che avrò modo di provare tra qualche mese. Nel frattempo ho spostato tutti i miei componenti su questo nuovo case e devo dire che ne sono rimasto soddisfatto.PRO4 ventole da 140mm 1 posteriore, 3 anteriori (4 vengono fornite con il case da 140mm)Pannello in vetro temperato leggermente oscurato presente nei 2 lati e nella parte frontale.Possiblità di montare radiatori da 360mm sulla parte superiore o anteriore.buono il cable managmentFiltri per la polvere nella parte superiore o sotto l'alimentatore.Controller delle ventole (scheda già premontata nel case) + controllo 3 velocità sul pannello superiore (quiet, off, extreme)4 porte usb di cui 2 3.0 nel pannello frontale + 2 jack (cuffie e microfono)Supporto per le schede video di dimensioni maggiorate con un piccolo pannello che va ad aumentare il sostegno della scheda videoCONTROFiltro per la polvere anteriore non presente e quello superiore non ottimale: si attacca tramite magneti ma non ha una spugna aggiuntiva con cui catturare la polvere ed essendo esposto senza ulteriori coperture potrebbe non essere ottimali nel caso di ambienti particolarmente polverosi.Allineamento dello switch a 3 scatti per la velocità delle ventole non perfetto, non si allinea perfettamente con le figure (per chi cerca la perfezione in tutto)Ventole pre installate non di altissima qualità vanno dai 200 ai 1200rpm colore bianco non rgbPesante con i 3 pannelli di vetro temperato ed i componenti assemblati potrebbe risultare molto pesanteIn conclusione è un case da comprare senza pensarci 2 volte se scende sotto i 100€, se lo comprate sui 129€+ potreste avere delle esitazioni: se avete la necessità di dover montare in futuro un radiatore da 360mm questo case è consigliato, in quanto elimina tutti gli spazi inutili sulla parte frontale, specialmente per l'inserimento degli hdd e lettori cd (chi è che usa ancora i lettori cd??) guadagnando più airflow e spazio per il cable managment in più lascia i giusti spazi per montare i radiatori.A primo impatto 130€ sono leggermente troppi in quanto si tratta comunque di un midtower però pensante alla qualità dei materiali hai 3 pannelli di vetro temperato, alle 4 ventole preinstallate e alla possibilità di montare radiatori da 360mm è una spesa che potete fare 1 volta e ritrovarla potenzialmente per i prossimi 5/6 anni cambiando pezzi e componenti senza nessun problema.Se dovete farvi un computer da 0 non fate il mio stesso errore di risparmiare sul case che poi ve ne pentirete! Partite subito con una media/alta gamma a seconda delle vostre esigenze, tanto il case rimane lì non si rovina!P.S: L'ho acquistato dal rivenditore "Kalfsen" e sono stati super gentili a venirmi incontro ad un problema che avevo riscontrato su 1 ventola, inviandomi 2 pezzi nuovi!