Every Medium (Racquetball Size) Pre-Cut Tennis Ball that we ship is constructed to last for years and comes PRE CUT and ready to install! NO TOOLS OR GLUE NECESSARY! Just squeeze and push them over your furniture leg! Our Medium Pre-Cut Tennis Balls fit nice and snug on furniture legs up to 1″ in diameter. Customers can easily extend the length of the cut to accomodate furniture legs up to 1 1/4" in diameter. Why use a regular size tennis ball that’s too big or felt pads that come off easily. And to get the ball rolling, we provide a 100% Satisfaction Guarantee on all Medium Precut Tennis Balls!
C**S
Nearly perfect
I wanted to purchase these tennis balls to cover the legs of outdoor patio furniture, to avoid the iron furniture leaving rust stains on the patio. Other leg caps weren't fitting properly or staying put, so I tried these. Despite measuring and determining the pre-cut slot would be adequate for the legs of my chairs, the fit was too tight. I considered sending them back, but ultimately used a blade to widen the pre-cut slot. This allowed the ball to fit over the legs of my chair properly. The tennis balls are obviously not as subtle as chair caps, but they're far more effective because they stay put and I don't need to constantly adjust them. Plus, the grey color isn't nearly as distracting as the traditional lime green tennis ball color!
S**N
Finally a product that works
Extra care in moving our dining room chairs has been a way for life for years to be mindful of neighbors below us in a condo complex. I found this product online, took a risk and amazingly, it worked - unbelievable!! The chairs are easier to glide and absolutely no noise whatsoever. As soon as I received this product, I installed them on 12 chairs for the evening gathering. Chairs made no noise, no complaints from neighbors below. The tennis balls are sturdy - had to use heavy duty knife to extend the opening. I highly recommend this product!!! The only issue I have is the Amazon delivery. This is the second order I've placed for the rest of chairs in our place. Well worth the money.
A**R
Durable, tight fitting, great product
Glad to have found these! I was using reg. tennis balls on my other chairs and when we acquired these chairs the tennis balls were too big. So I went looking and found these. Ordered them and a few days later they were here. We put them on and they fit great. They are tight so I'm not concerned with them falling off when moving the chairs around or having to lift them up. I like the gray color. I would recommend these. You won't have scratched floors with these on your chairs.
E**L
Ugly, but useful
I put them on my dining chairs. Makes my chairs look like walkers, which isn’t a good look in a 30-something year-old’s kitchen, but it’s better than having scratched hardwood.If your chairs have straight legs, I suggest those felt protectors you can stick on to the legs. The problem is, my chair legs are a little angled, so the felt kept sliding off, and then the glue from the felt protector would make my floors sticky. So these tennis balls seemed to be my only good option for angled chair legs, especially good to be able to slide my chairs and not have to pick them up to move them every time.4 stars for function. If they looked good, it would’ve been 5 stars. Would probably look much better if the tennis balls were half the size. Please make those!
G**O
Great for chairs
I thought these were too expensive, but my husband insisted on replacing the tennis balls we had on our chairs with these, and he was right. They are smaller than tennis balls, much less visible, much more attractive when you do see them, and very sturdy. Plus, NOT having to slit 20 of them by hand is a significant bonus! Hint: We have 6 chairs, not five, so had to buy four more advertised for walkers. They are the same size and look good with these.
A**R
JUST WHAT WE NEED
These precut tennis balls are perfect for our breakfast nook chairs. The floor is tiled and these tennis balls prevent scaring the tiles. They also making pulling the chairs up to the table. I am mobility impaired and pulling my chair up to the table can be a struggle but these make much easier. Even our able bodied adult grandson remarked on the improvement of moving the chairs around.
G**X
I does the job, but may need modification
These are not your average size tennis balls. They are a bit smaller, but they do the job. The holes are just slices in the tennis balls. We purchased these for the square tube legs on our cots, and found that we had to slice open the holes to get them to fit. If you are buying them walkers you should be fine. But just in case, be prepared to open them up like we did.
S**E
Used for patio furniture
We purchased these to put on our table and chairs that sit on our outdoor wood deck. The chairs where leaving indents on our deck and ruining it. We did have to make the holes slightly bigger in order for them to fit on the legs of the chair. We have received many comments saying what a good idea it was and how it looks good with the theme in our yard. They do what we wanted them to do in regards to preventing the marks on our deck from our table and chairs.
A**R
The Best Chair Solution
This is the only product that works for our chairs. They stay on, look decent and save our floor! Super Happy. I know I paid more for them than I would have liked, but if they last as long as I think they should, they will pay for themselves. I only wish the pack came with enough for 6 chairs and not just 5. Now I have one chair that doesn’t match and I don’t want to pay this price just for one set.
S**E
Fit our 1 inch rectangle chair legs
These are great... yes they aren’t very fancy but no more scraping the hardwood floors and the barstools slide silently at our kitchen island. We tried several other types of floor savers and these are the inky things that actually worked. They stay on, and don’t tear apart with use.
Trustpilot
1 week ago
1 week ago