EShineHand Wave Activated Under Cabinet LED Lighting Kit, Dimmable, 3-Pack 12 in - Touchless Dimming Control, Black Under Counter Lights for Kitchen, Garage, Office, Desk - Cool White (6000K)

Love the light and the color and the way the sensor Works awesome wave head under the cabinets I wish they can come out with the two sensors on to a different spots but no worries it's still good love it cool wite

I have an EShine undercounter LED light that stopped working. I bought them through Amazon in September 2022. I emailed eShine and they walked me through several fixes which didn't work. I received the replacement LED bar and the light works just like it’s supposed to. EShine was quick in their attention to my issue. I have had instances where, because I bought the item through Amazon and not directly from a company, they won’t provide any warranty or deal with the problem. I'm very impressed with their responsiveness and willingness to fix the problem. EShine really stands behind their products!

Lights are easy to install and provide excellent light. The first time we installed it, however, the infrared sensor was too close to the bottom edge of the cabinet. This prevented the light from turning off once it was turned on. Had to unplug it to turn it off. Discovered a note in the installation instructions that warned that the sensor had to be at least four inches from cabinet edges and items on the counter. Luckily we were able to "unstick" it and rotate it 180 degrees. While the light works as it is supposed to now, the sensor is not on the desirable end of the cabinet. Also, the two connectors that were supposed to come with it were missing. For my current installation, I needed the connector cords that also came with the light, but that is not the point. Parts were missing.

I cook a lot after I put these up the realization of shadows that were no longer put a smile on my face. Thanks

Motion detection works. I used the 3M self stick and was done in a matter of minutes. Make sure the leds are facing the rear wall. You don't want to see the bright lights when the leds are on. Turn them on before you place them to make sure you get the lighting effect you want. Once you place them using the 3M self adhesive strips - they are not moving - ever.

Love these lights. Nice long cords and easily expandable. Location is a bit tricky to make the motion detection work since they have to be some distance from the wall. Light spread and color choices are well designed.

We have an "L" shaped kitchen with two areas where, when standing in front of the under-cabinet countertops, my own shadow almost entirely blocks out the the light from the ceiling mounted 48" fluorescents-in-a-box-with-a-plastic-lens. When we first moved in it seemed the only solution was to install four--one in one area and three in the other area--under-cabinet halogen fixtures. That worked leaving only two problems: One, the backs of my wife's hands suffered sunburn and two, cold food on the countertop became warm food within 20 minutes. We opted for the halogen lamps not because we wanted sunburned knuckles or warm food but rather back in those days eight inch fluorescents didn't provide any useful light. Well, really the halogen gave us three problems: The carrier for the halogens seemed to have been designed for use on a battleship as they were large, operating-room white and therefore pretty much ugly. Then, there was lamp cord running to 110v outlets. Functional but not so beautiful.My wife got used to the burned knuckles, warm food and ugliness (sorta) but then one day--thank heavens--a lamp burned out prompting me to look on Amazon (really, where else would I look?) not for a replacement lamp but for replacement fixtures. Oh, there are so many; it was hard to choose. Because of less heat--which means a lot less electricity use--and a much more compact design, the only possible solution was going to be LED's. Yeah, but that still left a whole lot from which to choose.Then I found what I believe to be the only brand which included not only "wave your hand to turn on or off" but also "hold your hand under the "switch" and either dim or brighten the LEDs." Neat! And, they were so sleek and clean, they'd be all but invisible when looking at the area... what a great solution to getting rid of ugliness. Oh, one more thing: These countertops are work areas and therefore "daylight" lighting (6,000° Kelvin... pretty close to sunlight as opposed to kinda yellow light) would work best. So, I ordered one 20" eShine panel and one kit of four almost 12" panels, 6,000° K. Two days later I was holding them up trying to figure out how they'd look and how best to attach them to the bottom of the cabinets.The included instructions were clear and useful. The connectors and the over all design and manufacture of each component was obviously triple A quality. The inter-panel connectors came in both a "solid" strip, i.e., one continuous strip version and in a-chain-each-panel-by-wire (each about 36") version. And, I could attach the panels by screws (supplied) or by two sided (3M, no less) tape (supplied). There was even a goodly number of stick-up cable managers, supplied. eShine thought of everything; perfect!I attached all five panels using screws. Putting up all five panels took me about 90 minutes (I tend to be both slow and careful having graduated from the Measure Twice, Cut Once School) but that includes taking down the old fixtures and taking then out to the landfill can, aka. the trash can. Sad. Very.The finished job looks great. The fixtures work great and they cast truly excellent light. A perfect solution. I am very pleased... so's my wife and, around here, that really matters. These eShine panels get at least eight stars, for sure.(Notes: Hard to get a good image. The lights overexpose the image. What actually shows is aluminum but what you see here is reflected cabinet color. One image tries to demonstrate 6,000°K.)

Bought these lights after seeing the great reviews, and I now see why they had great reviews! The lights are of high quality, and they work exactly as described. I did have a large gap where I had to skip over an over the range microwave that has its own led lights shining down. I ended up splicing 2 of the cables together to make the cable longer. Worked perfectly. Only thing I wish it had would be Wi-Fi control to turn on with phone or Alexa. But definitely not a deal breaker, they work and look awesome! Highly recommended for sure!

This lamp works exactly as described and was very easy to install. It occasionally doesn't respond to a hand signal but a second attempt always works. It made 5-stars by an inch because that is how much wire I had left after I installed the lamp and ran the wire up the side of the cupboard and plugged it into the microwave outlet.

Provides more than enough lite..dimmer...and turn off features works as described

Liked the ease in installation however, I figured out why everyone said be careful about placement. We assumed it meant that the light stripes needed to be 4 inches away from walls, or any other hard surface. What they should have said is watch for the tiny little notice on the light stripe that has the sensor which tells you which direction to place the first light. Failure to do that correctly just means the light will not dim or turn off at the wave of a hand, you'll have to unplug it. Oh well, live and learn. I still love the daylight colour of the lights, brightens my kitchen completely.

easy install

C’est parfait comme je voulais