Specifications: Rated voltage: 12V or 24V Rated charging current: 10A Rated load current: 10A Over Charging Voltage: 14V / 28V Over Charging Revover Voltage:13.2V/26.4V Floating Charging Voltage:13.2V/26.4V Over Discharging Voltage:10.8V/21.6V Over Discharging Recover Voltagey: 12.3V/24.6V Load over-voltage:16.5V/34V Load over recover voltage:15V/30V Max Solar Battery Open circuit voltage:25V/36V Instructions: Open the controller cover, according to the cover illustration of the connection. 1. Insert the battery, "+", "-" correctly connected to the controller corresponding terminals (left 3, 4 terminals). * Load Indicator (load) blinks and lights up 15-30 seconds later, you are connected correctly, you can proceed with the following connections. Otherwise it will damage the controller. 2.The solar panels on the "+", "-" correctly connected to the controller corresponding terminals (left first and two terminals). 3. Load the "+", "-" correctly connected to the controller corresponding terminals (left 5, 6 terminals). 4. The charge indicator light indicates charging is strong; blinking is a floating charge; No light indicates charging stops. 5. Load indicator light indicates there is output and load can work; no light means no output, the load can not work. Precautions: 1. Make sure that before connecting the solar panels, batteries, rated voltage of the load, the rated voltage of the three should be the same, and are 6V, 12V, or both are 24V. 2. Solar panels, rated current of the load shall not exceed the rated current of the controller.
Trustpilot
3 days ago
1 day ago
