nibbi Racing Parts Motorcycle Replacement Parts Manifold CG Intake Manifold Engine Connector Modified Manifold Adapter For Motorcycle Motorcross Dirt Bike CG 125 150

Bought this to mount the Nibbi 26mm carb to my TaoTao DB-17 pit bike, fits perfect, port matched for the existing intake. Crisp flow, no restrictions. If you are unsure because of all of the videos saying you need to countersink the bolts for it to work.. you don’t. Flip the bolts around to where the nuts are facing the front of the bike, plenty of room for the hose clamp and is far enough on the manifold.

I quite liked this. Needed it to adapt to the intake for my Apollo RFZ Z20 Max. Only problem is that I needs counter sunk holes, and flat top, counter sunk machine screws. I had to reuse my factory bolts, as the ones that came with the adapter are too short, and the bolt heads are too big, and actually get in the way of the silicone sleeve.

Ended up cutting my stock intake manifold and using the Nibbi silicone coupler, the adapter bolted to the manifold made the carb stick too far out.

The rubber adapter sat in the way of one of the holes, ordered a different adapter instead that was one unit and worked perfectly.

Did not align perfectly on the factory Hisun 196cc engine on the Coleman 200EX, but drilled new holes and has worked fine.

My lifan 125 pitbike was sitting for 4 years. Put this on it because it matched the wheel color perfectly. Started up first kick after install. 10/10 would recommend, would buy again.

Fit perfect

Product was casted very poorly and not buffed or ground down to be proper