Body Solid (GLDA3) Leg Developer Attachment for GFID71 and GFID100, High Performance Commercial and Home Gym Attachments for Weight Bench, Strengthening Hamstring/Glutes, Thigh and Knees

Great product! I was iffy about getting this one vs a cheaper one due to how the pictures made the leg pads look but I couldn't be happier! Super high quality metal that's thick and strong and very nice leg pads. (Not to soft and not to hard) Also when doing leg curls and leg extensions, the design of having the pivot point higher and at an angle makes even the top contraction harder unlike other models where you get a jerky or kick back motion at the top.Biggest suggestion when installing or building it is make sure to line the caps up with the metal bar going through. There is a divit out of each of the caps to allow it to easily be pushed in with your hand. If you can't push it in with your hand carefully take it out with a flat head screwdriver and put it in with the divits facing the bar.Steps to build: (directions were very basic without step by step, but not to hard to build)1. Put all pads in first, (long bar goes into contraption that goes into bench)2. Put pad washers and caps on (easy to do with pressing it to your body)3. Then place end caps on. (The rounded one goes on the top part that attaches into your bench) my Manuel didn't have that one shown.4. Put two main pieces together with bolt and rounded caps facing outward away from the machine.5. This is the step that everyone complained about but it's really simple if you attach the protective plastic caps on like this. (Put cap over nut after tightening it to where the nut is flush with the bolt threading. Then using a small flathead screwdriver, insert it into the cap at the part that has a small notch out of it, as you put pressure on the plastic protective cap towards the leg extension machine slightly pull out with the tip of the flathead inserted in the underside notch of the plastic protective cap. After, flil the screwdriver around and hit the notch at the other angle and your done. Wish someone had how to do this because it took a little playing around to do to figure it out.6. Attach Olympic adapter if you picked up one. (The 8 inch one is good that's linked to the sight but there is a 1 inch gap between that and the weight stopping backing. Won't be an issue with any weights getting stuck though since all weights have a greater width anyways) Good addition if you have Olympic weights.But if you read this review all the way to now, I would definitely say go with your gut instinct and buy this and you won't regret it. Totally worth the price and some. Great quality, easy to build and a life time warranty if anything goes wrong.

This is a very well made leg developer. I'm not sure I've seen a better one, though I have about 3 minor complaints.1) Much of the marketing for this device shows it used with Olympic weights. However, it requires an adapter for use with Olympic plates. This adapter is not included, and I didn't see any notice of this. So it is not accurate to how it is marketed. (Adapters can be had in various lengths for $12 plus shipping. But it is hard to find one matching the quality of this unit. It would be nice if Body Solid at least sold one that was matched to it.)2) It appears to be designed for people with long legs. I'm 5' 11" with average length legs for my height and it seems an okay fit for me. It doesn't fit as well for my wife, who is about 5'8". But it is very usable by both of us.3) This is partly (mostly?) a bench issue, but the bench and leg developer are sold as a matching set, so it's worth noting here. The pin that locks the unit in place can appear locked when it isn't. I've had 200 pounds unhook and slam the thing down into the bench. No serious damage, but a bit scary. Locking it in requires more care and inspection than most locking pins on exercise equipment.All of that said, I would buy it again. It is the best one I've seen, and it gives good results.

This is pricey but so worth it. Very solid... very solid. I highly recommend it. Super comfortable for benching heavy weight. Leg pads are one of the most comfortable under heavy weight that I have ever used. I don't see why they even bothered to put a lifetime warranty on this because it's so solid, I can't possibly imagine how it could break. My kids will inherit this bench, lets put it that way.

I bought this attachment to supplement my leg press on leg day. I only do one leg at a time so I don’t need to put a crazy amount of weight on it. I placed a piece of wood under the front for a little extra ground clearance. It will lean forward some if you have over 90 pounds of weight on it but it hasn’t been a problem for me because I placed 80 pound dumbbells on the back just make sure it doesn’t move. I also do smooth controlled reps and I don’t lean forward. I like the fact that I can do leg extensions and leg curls on it. It’s a nice piece of equipment for a home gym.

This is okay, overall it does the job but doesnt fit perfectly in the slot. There is extra space between the leg curl attachment and the actual bench which causes the whole thing to wobble a bit when using. In the end it works but quality is lacking.

I purchased this to attach to a body solid bench. It works very well and I’m happy with it. It’s a bit pricey but the quality is good. Overall no major complaints

Overall, this is a good - not great - product. It is sturdy enough and made of steel, but some parts that are plastic could have been made of metal, such as the end pieces that hold on the cushions - mine came with one of these missing. I emailed the manufacturer who said they would send the missing parts. It is definitely better than what you would find in your typical sports store, but for the price they could have gone the extra step and not used plastic end caps, and made sure those parts were in the box before shipping.

I am really glad I purchased and did not listen to reviews. If you have the right tools which I do because my husband has a shop full, putting together was easy and was a perfect fit. Looks great in my home gym.

Consigliato!

Brilliant add on to my bench. Sturdy and good quality. Really happy with it.

Zunächst kurz zum ProduktEs wurde schnell geliefert und ist von solider Qualität...ich hatte es mir schlechter vorgestellt.Die Rollen haben eine gute Härte...nicht zu hart und nicht zu weich.Es ist in 15 Minuten aufgebaut.ABER JETZT DAS WICHTIGSTE FÜR ALLE ATX FANS.Ich habe selbst alle Geräte von ATX MEGATEC oder BARBARIAN LINE ( weil alles die gleiche Firma)Nachdem ich vergeblich versucht habe in Coronazeiten und Lieferengpässen aus welchen Gründen auch immer ,1JAHR EINEN ATX Aufsatz oder Komplettbank zu bekommen...habe ich einfach dies ausprobiert ...und siehe da, die 45 mm Aufnahme passt haargenau in meine beiden Bänke.Ich musste mir noch zusätzlich einen 30mm Adapter für die Scheibenaufnahme kaufen ( 26€) ,da die Stange von Body Solid nur 25mm ist und dann klappert.WARUM MAN SO ETWAS MACHT IST MIR UNVERSTÄNDLICH.Eine weitere Modifizierung ist das angebracht Gummiband von mir.Man hat beim Beinbeuger einen kompletten Zug und kippt nicht an der höchsten Stelle in Richtung Gesäß.Stattdessen zieht der Gummizug den Vorsatz schön zurück und es geht von vorn los.Ich hoffe ich konnte alle wartenden ATX MEGATEC UND BARBARIAN LINE FANS weiter helfen.1/3 günstiger ist sie übrigens auch.

Ho comprato questo accessorio leg extension leg curl per la mia nuova Marcy Compact Gym PM4400 ed è compatibile. ho provato a farci leg extension e non è affatto male. Ho avuto problemi con il montaggio, le istruzioni sono fatte molto male, le viti si sovrappongono e non capivo come metterle in un primo momento anche se ragionando ho visto che la vite grande andava solo in un buco e il perno di ferro nell'altro. I cappucci di plastica per la vite vanno incollati? sicuramente così come vengono forniti non si reggono. Per 150 euro potevano fare un pò più attenzione a questi dettagli.

Ich habe einen Beinstrecker-Aufsatz für meine ATX-Bank gesucht. Der Original ATX-Aufsatz war irgendwie nie lieferbar und obendrein deutlich teurer. Nach umfangreichen Recherchen, bin ich auf Body-Solid gestoßen. Das wichtigste: der Ausatz passt optimal. Er tut was er soll, aber studioqualität ist weit weg. Auch mit meinem ATX Equipment kann Body-Solid nicht mithalten. Mit Gummibändern kann man die Übungen deutlich aufwerten, die Belastungskurve wird dann für mich angenehmer.