Bigfoot Longboard Wheels 76mm 80A SHR Mountain Cruisers

I'm used to higher end wheels in the 76mm range(for longboards and also the street luges I have built and ride). The first things I noticed are two: 1.) the wheels I received were as near perfect(not lopsided or of bad pour/production). 2.) it was harder to seat the bearings in these wheels, than any other wheels i have ever set up! That would be inexcusable...but they are not to difficult IF you have had experience(CORRECTLY)installing a bearing in a tight wheel. There is a definite trick to it and if you do it wrong you can ruin the bearing. I got my bearings in all four wheels(equals EIGHT difficult bearing inserts! it took a light hammer and a phillips screw driver(sounds odd, but works great). Once they are in...they are fine as long as you make sure they are fully inserted and seated. Many skaters often switch wheels from board to board(and also bearings at times). You won't want to do it with THESE wheels! Plan on leaving what bearings you put in....IN. That won't be a primary issue for most(nor me, since these cheap wheels are being used on one board in particular).I have not had a chance to skate the wheels more than about 4 blocks, during a short dry spell yesterday. They roll very smooth and are VERY 'sticky' at first. You won't be sliding on these...which is a good thing as they are a grippy DOWNHILL and basic cruising wheel. Nice and comfy ride as you would guess from a mid duro 76mm wheel. Only downside i can see so far...past the comparitive pain in the *** ,getting the bearings in. They are SO tight that the bearing rim creaks as you tighten the axle nut to final position. I do not understand why they were not more carefull with core dimensions? EVERY bearing seat presented this way too tight issue.

These wheels make riding again so much fun, smooth ride and just like some other reviews I read before buying these is the the rocks on the road don’t really matter anymore you can just enjoy the ride, asphalt and cracks on sidewalks are a thing if the past with these Bigfoot wheels. Softer ride overall.

Great wheels. I've been skating about 5 miles a week to campus and back for months with these wheels, they even managed to keep their grip in light rain and dirt

I bought a set to replace the factory wheels on my Retrospec longboard. With the same bearings, the ride is significantly smoother, sticks and rocks don't cause as much of a disruption, and they roll considerably farther. Great buy!

These wheels are what you need if your cruising around the city. Driveway's are no problems. Don't even have to look to know that the board will go over any curb without worry. 100% satisfaction with the yellow jacket barrings.