MasterGel Maker Ultra-High Performance Thermal Compound, Nano-tech Diamond Particle 14 W/m.K

I used this for a 12700k and this paste really makes a difference for about 5-7 degrees when you compare to MX4 or HT1/HT2. This is really important when you have an air cooled ITX build as in my case. Before easily this chip hits 95C with aforementioned pastes, now with this Coolermaster and using the same heatsink and fan, my 12700 hits 88-90C max. For me, this is an amazing improvement for a low profile heatsink with a k chip by just changing to a good thermal paste, such as this one. The paste is thick but it’s not hard to spread. The only downside I could say is about the tube is only 2g.

This is more than perfect for a ps4 or ps4 pro. It not only cooled the ps4 pro but it brought up performance and it doesn't sound like a jet engine taking off. Using this compound and replacing thermal pads with 1mm thermal pads. And a thorough cleaning made the ps4 pro I refurbished run like the 1st day it was turned on. I highly recommend it for people who use high demand apu, gpu, or cpu. It's not like thermal paste. It's more like a thermal grease. You will have to coat the chip. A dot won't do. And you can go thick on the chip. A 1mm hight of this compound should be best. It did make a significant difference over thermal grizzly compound

Works VERY WELL! Yet it's a very wierd texture & MUST BE NOTED THAT THIS IS NOT EASY TO SPREAD!!! Its very chunky and even ROCKY! But is VERY worth using! You must SPREAD this acrosss the entire IHS with the included Spatula.This is NOT the type of paste where you squeeze out a shape and press.No no! This MUST be A FULL SPREAD!And when done right, you'll be very happy! I Guarentee it!This stuff feels like spreading diamonds on your PC but dropped my 3950x's TEMPS by (I'm not joking) a full 35° degrees celcius under max load!This is honestly my second one!And it's like no other!I HIGHLY recommend this thermal paste! Oh my God it's good!

It spreads thick and sticky. Worked well saw cooler temps immediately. Determined my water block must have been loose. It bottomed out when i mounted this time and felt mounted well. Cools much faster then before also. Fans and motor kick up and drops fast fans slow back down. Saw 63c before dropped to 49-50c after. Overclocked a little more also stayed around 63... Was getting 85c on my 11900k and felt that was tooooo hot.

Aun no la he probado a largo plazo, pero los valores iniciales que arroja la temperatura son excelentes. Quedé satisfecho.!!

This paste is almost like spreading liquid plastic. It adheres to itself well enough and is thick enough that it doesn't get too messy but almost half the tube winds up stuck to the tiny spatula which was a awful spreading tool because it isn't wide enough to make a level pasting in a couple passes. The spatula, the amount of paste, and the price are why I give this only 3 stars.

This product is approximately the consistency of Thermalright TFX, which is very thick, almost like toothpaste. The retail package includes a wipe, which is good for one use, and a spatula to install the product.Due to its consistency, I don't think it would work well when applied as a line or pea sized dot. Spreading was reasonably easy at around 75F, but I imagine it'd be a pain at cooler temps. I'd recommend starting with a line at one edge and using the spatula to spread it to the opposing edge.Performance is fine, as most high high end pastes perform within a couple degrees of each other.

It worked after I fought with it awhile. I had issues with the PC detecting the CPU as a different CPU. I attribute excessive pressure. Temps were acceptable, but I removed this and used a different compound.

Facil de aplicar

El producto es muy bueno y fácil de aplicar