12 Pack - 10 Gauge 1 Inch All Metal Blunt Tipped Dispensing Needle, Stainless Steel, Luer Lock | Refill Cartridges and Transfer Viscous Liquids Oils Glycerin Distillate Epoxy Adhesive

These worked perfectly on my vape juice bottles with leur locks. I'd been using the cheaper 14gaige with the plastic end but after a while the needle would spin inside the plastic and leak out while dispensing. These are solid, strong and at 10 gauge, they really let the liquid out fast. I can fill my squino bottles in 3 seconds where I used to have to squeeze the bottle for 30 seconds with the 14 gauge needles.So glad I got these!! Totally worth the upgrade!!

Great for very viscous liquids. I mainly use them for chilled vegetable glycerin(below 0C) which is extremely thick and hard to work with at such cold temperatures. Not a bad price for a dozen full metal 10 gauge neddles. They seem to be lab grade quality but they're definitely not pre-sterilized, if you need them to be.

Better than the cheap disposable ones. Very easy to clean and sanitize for the next use. I will buy again!

The media could not be loaded. Picked up a tip to use a syringe and blunt needle to reach tight spots and I find these large gauge needles helpful for thick materials like caulk. Company was great and very responsive to my Luer Lock confusion

cleanly apply wood adhesive accurately and neatly..this aizeis not easily obtained. ie blunt end 10 ga... I got next day delivery...saved the day for me...Warren...

Worked well for injecting filled epoxy for a wooden boat restoration project.

I've always used heavy gauge veterinary hypodermic needles to inject various nasty stuff into tight places. This is much more suitable. Larger gauge than any veterinary needles I have access to. My favorite application is to drill suitable holes into woody brush and inject a few drops of 2,4,D. Will destroy with no collateral damage. I also had some roof screws leaking and chose to remove the screws and inject just a bit of Gorilla Glue into the holes then reset the screws. Problem solved.

These needles look nice but when you try to draw a viscous liquid into the syringe they don't work. They DO NOT seal air tight and allow air into the syringe. Not good.