🎶 Elevate Your Tone with FLEORAlnico!
The FLEORAlnico 5 TL Pickup Hot Rail Humbucker Bridge Pickup features dual hot rails, 4 wires for coil tapping, and a resistance of 12-13K. Designed for vintage Fender Telecaster bridge replacements, it boasts Alnico 5 magnets and a fully wax potted construction to ensure minimal noise. The package includes all necessary installation hardware.
J**P
GREAT tone, couple quirks
So, I put the 9-10K bridge pup in my 2014 American Standard Tele for a HS configuration. I used 500K CTS 3/8 smooth shaft audio taper vol / tone pots with a .22mf capacitor in standard tele wiring fashion. It REALLY sounds great... like, I was wondering if I was out of my mind putting a cheap pup in my expensive tele... but I couldn't believe how good it sounded when it was done. The bridge on split sounds very close to the nocaster I had in the bridge. It couples very nicely with the twisted tele in the neck. The bridge on humbucker mode sounds fantastic... beefy but not muddy, midrangey but not honky, good clarity in the top end. Couple issues tho, #1- You can see in the pic, the pickup does not sit square in the bridge plate hole. The holes are slightly off. #2 - The holes were not tapped all the way through. The screws have to be put in with some force to cut the last little bit. But they went in. #3 - The springs are a little long, and could be a problem if you wanted the pickup closer than about 3/16 of an inch to the strings. #3 - there are no instructions. BUT you can find a diagram online. I soldered mine to a 4 way switch for Humbucker, Split, Split + Neck, Neck. FYI, the GREEN wire is FULL HUMBUCKER (I soldered to the position 1 lug), the RED/WHITE wire together is SPLIT (I soldered to the position 2 lug), the BLACK / BARE gets soldered to the back of the pot for ground. For this wiring config, I soldered neck to lug 3 and 4, then jumped a wire from 2 to 3, plus a wire from the main lug on bottom right (to vol pot) to main lug on top left (when control plate is upside down). Hope this helps somebody. It was a royal pain trying to figure out.EDIT: I downgraded to three stars. Pickup is microphonic at higher volume levels.
R**S
Nice tonality..
This pickup is well built, with a nice hot output and lots of sustain. Bass and treble are neutral and not hyped up, mid range is creamy smooth overdrive with gobs of sustain. Excellent pickup that easily hangs with pups costing 3 or 4 times the price..
J**E
Great pickup!
I have the 14k version. Great upgrade nearly free. Its screaming and hot with a nice warm tone. Still retains most of the tele clean sound, but Its for crunch and it does a great job at that. Mine has been wax dipped and is not microphonic. Totally shocked actually.
D**N
Great
This pickup is way more then I expected! It has bite, and tone. All the features of a full sized hotrail in a single coil size. It can scream and yet it also can do blues. Sounds like a pro style rail, without the coast! Buy it you won't be sorry!!
C**O
A NICE SURPRISE
I love the sound of this rail. It has a nice sweet sound for something that is hotter than your normal Tele bridge pickup. It can do clean and high gain standing on it;s head. A very nice little Tele bridge pickup!
M**S
Forget those $200 pickups! Buy these!
Unless you are playing in a concert arena, this is the pickup for your Telecaster.I am a professional luthier and have spent the last year buying and testing inexpensive pickups for my customers without big budgets.If you are mostly playing on an amplifier at home or a small nightclub, the 6-7 ohm version is absolutely perfect.Beautiful twang yet can turn out some serious Rolling Stones tunes also.Been installing these with a Bournes push-pull tone pot for splitting and am undeniably impressed.This IS my shop standard for any Telecaster now...
R**S
Excellent
This was a nice pickup it works very well and it really added a lot of beef to my tele. It really sounds good and it makes for a very good telecaster pickup. It sounds very good on a clean channel as well as a overdrive channel on my Marshall and it was definitely worth buying.
T**S
Hits way above the belt.
The media could not be loaded. I have personally installed a lot of pickups and the install was easy. Metered around 13k ohms on my multimeter. I actually prefer it to the Seymour Duncan hot rails I’ve had in the past. It is an Alnico 5, it feels like a super charged PAF. It hits almost as hard of the Seymour, yet has more clarity.
R**N
Great pickup
Used in a Telecaster build. Very impressed and can’t beat the price
つ**ち
しっかりした造りで、お値段以上のクオリティ
安いので、造りも音色も期待してなかったのですが、普通にキレイな仕上げでしっかり作られてます。音も、シングルコイルのキンキンした感じがなく、使いやすいテレキャスサウンドで満足です。高さ調整ができるポールピースではなく、ブレード型ですが各弦のバラつきもなく優秀だと思います。他に使うギターとのバランスも考えて、いちばん出力の小さいタイプを選びました。底面プレートのネジ穴が小さかったのか、付属の固定ネジがキツキツで途中までしか入らなかったので、他の部分の改造ついでにリペアショップで処置してもらいました。この価格でこのクオリティ、有名なメーカーのピックアップの価格にはブランド料も含まれているんだな、と感じます。(それが悪いこととは言いません)
A**R
Microphonic sadly.
A decent pickup in the Bridge but mine is microphonic when cranked. It'll do for now till I can afford a real Brand name pickup.
A**ー
安い
ノイズなくて良い。
K**様
品質管理がよさそう
付属品のビニールパッケージとか品質管理がよさそう。音は13KタイプでJBライクな高出力です。バッカスのタクティクス テレキャスターに付けました。ネックのP90が出力が強そうで低音の歪み方がいいのでブリッジもパワーアップしてバランスは良くなりました。ビートルズのゲットバックとかツェッペリンの天国への階段とかあまりアンプで歪ませなくてもブルボリュームで前後とも微妙に歪んでくれます。サスティンも長いのでダンカンの59とかJBライクな音になります。ほぼ間違いない。
Trustpilot
2 days ago
2 weeks ago