Simple Transfer Process✔ You will want to load your heat transfer material into the cutting machine with the clear plastic facing down. The backing of the material will be facing up.✔ When using Silhouette Cameo, the settings to start with are Blade 2, Speed 8, Thickness 20. The maximum you can use for each setting: Blade 2; Speed 10; Thickness 23. Depending on how intricate the design is, you must change accordingly. And always consult your manual. ✔ Once your design is cut, you can trim around the design if there is extra around the edges. Then you will want to peel off any parts of the design that you don’t want to be ironed on, or the negative space. ✔ Take the weeded pieces of your design and place them clear backing side up on your project so they are aligned. Since the clear backing is now facing up, your design should show just as it will be when it is finished, you should no longer be looking at a mirror image. ✔ Now you can either use a heating press machine or iron the design on, which can be made using a piece of parchment paper between the transfer sheet and the iron, or a teflon sheet.E-BOOK INCLUDEDThe instructions electronic booklet in PDF format (E-BOOK) will be sent to you via "Buyer-Seller Messaging", after you placed your order.Sometimes, it happens that you have chosen to opt out of receiving unsolicited messages from sellers, so our message will not reach you. In this case, in order to receive the E-BOOK, write us a message. Go to the top part of this product listing and click on "zoomscout" (under "Sold by zoomscout and Fulfilled by Amazon."). Then click the Ask a question button. Or you can also go to Your Orders, find your order in the list, and click Get help with order.Thank you for choosing Vanylin!
Trustpilot
2 months ago
1 day ago
