Motors & Armatures 10728 1/4 hp 1075 RPM - 1 Speed 1.8 Amp Outdoor Condenser Fan Motor

Installed and worked perfectly.

This is a great universal motor. It comes with an extra long shaft you can trim to the length you need with a hack saw or sawzall. The direction it spins if reversible with by just swapping two wires. It fits exactly in place of my old motor and the wires plug right into place. And it was over night delivered at no extra cost! I can't recommend more highly.

Worked perfectly for my a/c . Nice and quiet now. Cutting the fan blade post was a bit of a drag, other than that I highly recommend. Wiring diagram was on the outside of the box, NO instructions inside. Still super easy to figure out and replace. Videos galore on the internet to show you how to do it if you are a dyi type of person.

High quality ball bearing motor. Five MFD cap sold separately. Good torque. Reversible. Cool and quiet.

Arrived on time, easy installation, the a/c is back to be working. Came without terminal plugs, However, Black to power source(Contactor), and, on Capacitor side, Yellow to 'C', and Brown to 'Fan'. Unless uses separate Capacitor (5uf), the Brown/White wire will not be used.

First and foremost understand this is a "universal" replacement motor. Read and understand your wiring diagram. You may need to trim the studs to make the rain cap for back on. Use loctite to ensure vibration will not loosen your repair. Also check your clearance, wires, blade spacing, etc.That could be catastrophic. Hums and buzzes like the last one did. Recommending for now. I paid for my product.

Replace my k55hxggj-8196 perfectly, just need to cut the shaft .

Replace my 15 year old AC fan motor. It kept stop running after 30 minutes of run time. Replaced the capacitor but the problem persisted. Next logical step is the motor itself. It would have cost me a tone of money had I called the A/C repair guy. (The last service guy from a well known local service company told me that I need a brand new unit for $3 grand and he can knock it down by $500 if I let him have it. I had different honest guy came to look and turn out to be just a simple dirty coil). The motor is bi-directional and it came with clockwise setting. My fan motor is hang up side down so I have to reverse the flow direction in order to get the correct air flow. Air should be blowing upward, not down. It's an easy task, just follow the instruction to connect the color wires for flow direction setting. Wiring diagram is clearly listed and simple. The mounting bolts are way too long so I have to cut them with a bolt cutter to prevent the fan blades from hitting them. It does not come with wire terminals so you have to buy them separate at the local hardware store or HomeDepot. AC is back running.