Tub Cast Ekopel 2k Bathtub And Tile Refinishing Kit With Install Kit - Comes With Tape, Plastic, Stir Stick, Toilet Cleaner, and Scrubber - Odorless Bathtub Refinishing Kit - Custom Tub In Hours Set - Bright Gloss White

This is an unbelievable product. I had an old surround until I used BONDO to fill holes as per instructions. Then u clean with a toilet bowl cleaner that etches. Next let it dry and use the wipe on primer. I purchased the double set, for surround and tub. The small bottle of wipe on primer was enough for the whole tub and surround. The temperature has to be 75 in the bathroom for three days. I used a kerosene heater. No problems at all with curing. The mixing part is not fun but doable. The rollers that came with the kit were junk. The inside of the roller came lose from the base part. I was less than halfway through with my first coat when the roller started messing up. Make sure u have a several good quality foam rollers on hand. Other wise u will have junk in your paint from your roller. It’s almost impossible to get junk out of the paint without making a gouge. This paint need to be worked for as long as it’s still wet. This is my first time and I see some bad spots. Just too much paint or small runs. Overall I would do it again. I would just prepare with more rollers. My last pic is of a spatula knife. It was on the bathroom floor and the corner was stuck in paint. It cured to the linoleum flooring. I had to yank it up and the knife broke instead of the paint cracking. The whole corner of the knife cracked off!! The paint was still stuck to the floor. This is an amazing product. I have it a 4 star because of the rollers. Instructions could be better about telling u how to work the paint etc. I feel confident this will last a long time.

Surpassed my expectations…so pretty!

Definitely a learning process, if I could say one thing, don’t be afraid to remove some if it’s running and puddling too much. Don’t work it too long either. There is a fine line, but an enjoyable process.