Mount, Stand For Old Version of Ring Doorbell Pro, 20 or 40 Degree Braket For Ring Video Doorbell Pro(Doorbell Not Included)

If you want a quality product to enhance the angle of your Ring Video Doorbell, this is it! the materials are first rate and install was a piece of cake. Using this made all the different for the angle of my Ring Pro.For now I only used one, 20* piece to see how that works, but if I want to increase the angle, I will add the other 20* piece. I used the black finish on my Ring to match this on my front door. They both look great and like they belong. I am pretty meticulous about my house the my finish work. This item did not disappoint. Thank you!

My bell is positioned to the left of the door and the fish eye lens didn’t quite catch the whole porch so people would be standing at the door and the camera wouldn’t see them. So I found this angle bracket and ordered it immediately. I’m glad I did! The angle gave me a perfect view of my porch and front yard! I can now see people fully when they are standing at by the door. Another good thing about this is that it’s metal, it feels strong and won’t break. Since these were black, I spray painted it and the ring cover white to match my door and it looks awesome.

Works perfectly. And I didn't have to drill new holes, as I'm able to reuse the holes already drilled for the Ring. A 20deg angle is just what I needed to see down the side of my wall. It's made of durable metal, although a plastic one should be as durable since the Ring is plastic too and it's not like the angle would really be taking a beating every day.I've attached a before and after photo of a 20deg install viewed from my Ring Pro. Using 40deg would not gain any advantage other than hiding my front door. I've also included a picture of my porch to show the install location.

I had installed 3 ring doorbells before finally taking the plunge and buying the ring pro for myself. I knew I needed an angle mount because my existing doorbell faced parallel with my street and my front door practically sits on the sidewalk.I finally settled on buying this set, due to the fact that I did not want a plastic angle mount wedge. The adjustable ones are easier to tamper with, and one of the ring pros I helped install, the plastic wedge the owner purchased felt flimsy.Pros:- solid build- coated steelCons:- there is a notch between the two 20。 pieces. Not aesthetically pleasing, could be a water issue for areas that rain more.- cheap screws and wall anchors- DEALBREAKER. If you are unlucky enough to get a set with m3 screws that are too short to attach your ring pro to the angle wedge - I was one of the unlucky ones that took the chance. Ended up having to drive to a hardware store and buy m3 x 10 mm flat machine screws to make it workThis would easily be a 5 star purchase if the proper screws were included. However, any time or money saved is given back by having to go purchase the right screws. Even more unfortunate for me, the local Home Depot did not carry anything smaller than m4.

These are high quality anodized aluminum castings. I have no idea how they can sell them for as little as they do. They definitely do the job they are made to do.The only issue I had was during installation. My Ring was mounted to the brass plate that our original doorbell used (see pic), and I just drilled a pair of holes to mount the Ring Pro (the holes in the Ring are centered on the top and bottom of the device). These angle mounts can't have centered holes to mount the Ring and use the same holes that the ring originally mounted to, since you can't have two things in one place. Their solution was to offset the holes that mount the angle bracket to the wall, keeping the Ring nicely centered on the bracket. The result is that I couldn't use the same holes that I originally drilled, because the bracket ended up about a quarter inch offset and it looked really bad on the mounting plate. The fix was to drill new holes with the proper horizontal offset so that the bracket was centered on the plate. Not a huge deal, but was a step that I didn't think I'd need to do until I started working on it.For folks installing a Ring Pro for the first time with this bracket, you won't have this issue - it's only for retrofits of an existing Ring Pro installation.The finished installation looks good-not-great, but for the price of the angle bracket, I'm happy. It definitely gives a better view of the walkway up to our porch now. Definitely recommended.

Easy installation. Made from cast metal making it a solid mount. The only caveat, I wish it came with the wire slit like the OEM mount. It isn't a big deal though, just turn off the power and unscrew the wires to feed through mount holes. It just would have been more convenient to be able to see the result before remounting to frame. Overall though, I am highly satisfied with my purchase.

The angles were impressive when I unboxed them. The first angle was easy to install. But when I attempted the second to make it 40 degrees, none of the screws fit to put them together. I then realized that maybe 20 degrees was all that I needed so I attempted to mount my Ring Doorbell Pro. Again, none of the screws provided by Ring or the angles fit. I ended up mounting the Doorbell without the angles. That will have to work until I decide what to do and may even suffice. Meanwhile, I'm sending these mounts back as defective. If all of the screws had fit, I could have rated this very high for the value.

I wasn't sure I would be able to use a Ring doorbell because of the angle that the doorbell faces. I bought this mount and it works great! It's made of metal not like some of the other plastic options that are also sold on Amazon. The one issue is that the screws that come with it to screw the Ring into the mount just aren't long enough. A trip to your local hardware store for a couple of new screws at a cost of about .40 will solve that issue. It's now up and working flawlessly. Gret mount!

Perfect for mounting your Ring Pro in awkward corners or to point it at an angle. Comes with everything you need. Installation instructions are straightforward and clear, though you'll want to make sure you use the correct screws as a few are very similar. The solid metal construction is a welcome change in our world of cheap, disposable plastics.

I used this with the newest 2018 Ring Doorbell Pro and it worked fine but I needed to find slightly longer M3 screws (due to the 'fins' on the back of the doorbell) to attach the doorbell unit to the mount. The ones that come with the doorbell do NOT fit the mounting holes on this mount and the ones that are included with the mount are too short (1 or 2 mm longer would have been OK). I guess this is why the description states this is for the 'old' model. Otherwise the mount was perfect for what I needed with a lot of options for attaching it to the house and I really like the metal construction as it is very solid even with both plates installed.

Great prodproduct! Excellent build material. Completely changed the view from my Ring doorbell so I have a good line of sight to the front of my walkway. This mount allowed me to use my existing doorbell wires and mount the doorbell to the door frame (siding) where the regular doorbell was instead of having to fish wires and go through the brick.My installation videohttps://youtu.be/FHDDwZLRH_8

Works as expected, easy to install. I have 2 Ring Pros installed at home at two difference entrances. The only thing I'd hope for is if I only need 1 piece (20 degrees), I can use the remaining piece for another Ring Pro. Other than that this thing is perfect.

Ring Pro uses existing electrical wiring and in order to place the Ring where I had to place I used this adjustment adapter. It aligns with Ring Pro perfectly. I used only one of two brackets. It has nice black finish and made of quality metal. It comes with screws to mount on the wall and with screws for Ring Pro.