CAMVATE Leather Handle 15mm Rod Shoulder Mount Rig with Rosette Standard Accessory for DSLR(Black,M6 Thread,31.8 mm) - 1471

Should be a little cheaper, but is very comfortable and ergonomic. The screws holding the rosette in place tend to slightly jiggle out of place.

I've had three sets of hand grips for my 15mm rail system and this is by far the best. I was an idiot and didn't tighten the screws that actually lock the rosette teeth in place so I was getting a wiggle initially. I contacted support all heated and as soon as they responded, I figured out the issue. Once the screws were tightened, the thing is rock solid. I have a 35lb should rig I use these on and they've been perfect.Shoutout to their customer support too. Very quick to respond, kind, and seems very helpful.Very stable and the leather is so comfortable. They really paid attention to detail on these grips. Highly recommend.

It's got grips that remind me of my early 80's BMX bike, but LEATHER.There are a few small screws that get loose, securing the backside detente panel that's covered by the frontside panel secured with a thumbscrew. When those get loose the handle will feel wobbly - not what you want with your shoulder rig. I'd recommend removing the handle by fully unscrewing the thumbscrew. Take those 4 little screws out, add some blue Loc-tite, and reinstall. You never need to remove them anyway, since all adjustment happens at the thumbscrew.

My whole reason for buying grips with rosette mounts was to avoid movement of the grips. The rosettes stay together great, but the inner rosette is very poorly fastened to the frame: it uses 4 extremely soft metal Phillips screws– no thread locker, no o-rings. All 8 screws rattled loose the first time I used this on my rig! So the handles could move until I tracked down the right size Phillips.

Good quality. Comfortable, durable and functional. Price point 10 to 20% above comparable products.

Good handles, but poor design in terms that they do get lose. There’s literally a phillips screw separating the handle mount and the handles, and it’s a must-carry a screwdriver to set if you wanna use these. Once tightened these work well, however, I fear they will strip with time.

Love these! Very sturdy and amazing build quality. Only issue is trying to set down camera with these on is basically impossible.

It's allright it gets the job done

These are some seriously comfortable handles, they handle a good amount of weight and look professional, certainly worth every cent, no regrets at all. I had the cheap neewer brand handles before but they were not comfortable and couldn’t support the weight of my rig without moving position.

pretty solid for it’s price point. plus you get really comfortable handles. would recommend

I though this was a great product up until about two weeks after using it. The screws where the rosette attaches to 15mm rod clamp have worn already and the handle now rotates even when all screws and rosette is fully tightened. It feels very unstable now and I nervous about using it on a shoot tomorrow.

Sturdy and well made