Knifeless Finish Line Vinyl Wrap Self Adhesive Cutting Tape (50m (164ft) w/Detailer)

This works perfectly when you are in a situation where you need a perfect line and don’t have an edge to cut along.

Works perfectly for Vinyl wrapping on various places especially corners. Gives a clean cut!

I'm wrapping my car for the first time and saw pros using this in their tutorial videos. I received my first roll of it with a wrap toolkit I bought off of Amazon. This purchase is my second one. It really does the job right. You'll never have to put a blade near the paint of the car so long as you have knifeless tape. I was able to do a custom stripe look for my car with knifeless tape with lines better than if I used a blade or my vinyl cutter. It also is a pretty easy cleanup job when done.The only issues couple issues I had with this knifeless tape is that adhesion could be a little better. You really need to make sure it's sealed on tight on. If it's loose, or the vinyl isn't firmly pressed on top of it, there's a chance the cut will be jagged. The only other issue is the price. $15 for a small roll and $30 for the larger one is a little steep. I hope the price goes down over time.

A bit of getting used to as is my first time using. Tip would me to pull I. A continuous movement as leaves small tags if in stages

Supposedly it’s supposed to be a filament that cuts the vinyl but in fact the material was just ordinary string. Adhesion did not stick well to the hood of my car when applying and when trying to cut the vinyl it wouldn’t even cut, instead it just lifted it and misaligned everything.

All of the car wrapping tricks and techniques are new to me. I decided to wrap my 2006 Ford Focus ZX3, which was is in great shape but the design overall is a bit tired and boring. Into a total wrap by only a bit, I discovered the benefits of using VVivid's Knifeless Tape, a super cutting concept that makes even a beginner like me, look like a pro. Check out the many You Tube features on Knifeless Tape before you start cutting expensive sheets of vinyl. You want to keep knife blade proximity to your car finish to an absolute minimum. So by using this alternative your racing stripe designs as well as cutting lines along cool features of your ride, you eliminate razor knife damage or 'shakey jake' cut lines and enjoy a sharp pro cut. Remember that the actual cutting line is off to one side of the tape so practice on several pieces before you get down get funky with your wrap.

This tape made my life much easier on my last couple vinyl installs. Way simpler and lower stress than cutting on a car. My only complaint is that the adhesive is not more aggressive. A couple times when working on a vertical panel, the tape had a hard time staying put. I had to go over it twice with a heat gun and squeegee to get it to stay long enough for my application. That said, I will definitely be using this again!

Stuff worked great, cut nice clean lines, didnt stick to the wrap when adjusting the wrap. My only complaint is the bigger 50m role is out of stock for a few months so I had to buy the smaller 10m roll role.

This took almost 2 months to arrive as they ship it directly from china. When it finally arrived I was pretty disappointed. There is nowhere near 32 ft of tape on the roll and it does not work well at all, every cut has been jagged or tore out the side. Like everyone else says, just buy the 3m stuff.

It's knifeless tape, goes onto surfaces to help cut lines through vinyl wrap without a knife.Comes in a clear plastic bag with instructions on how to use it.Works well when used properly! I learned this the hard way when i didn't apply the wrap close enough to the edge and managed to have the tape tug a little mid cutting wrap on my car roof, but when applied and prepped properly this works flawlessly!Quite happy with the tape, works when you use right, doesn't when you don't.

It's difficult to use getting the knifeless wire itself through the plastic tape. However when it does come through it works well. Gives a cleaner effortless cut. To avoid the jagged edges ensure the vynil is down properly. I have had it lift up while wrapping but wasnt that hard of a fix. Prep is key.

i like the idea of cutting vinyl wrap easily with one pull of knifeless. Not worth it with the price since it does not really cut nicely. Need to be snappy when you pull it. Does not create a fine cut but ripped or jagged.

like anything 3m it just works, its like a light saber for vinyl... unfortunately i'm not a Yoda level wrapper just yet