🔧 Elevate Your Craftsmanship with MEIGGTOOL!
The MEIGGTOOL Router Bit Set includes three precision-engineered bits designed for creating rail and stile entry door frames. With a 1/2-inch shank and cutting depth, these bits are made from high-grade YG6X alloy and feature C3 Micro-grain Carbide for exceptional durability and performance. Ideal for a variety of materials, this set is perfect for both professional woodworkers and DIY enthusiasts looking to enhance their projects.
| Brand | MEIGGTOOL |
| Manufacturer | MEIGGTOOL |
| Model number | MN-051S |
| Number of Memory Sticks | 3 |
| Item Weight | 640 g |
| Package Dimensions | 20.5 x 14.91 x 5.99 cm; 640 g |
| Item model number | MN-051S |
| Are batteries included? | No |
K**R
Adjustments were made, but I fixed it
It was cheap and I made a door 🤙
C**X
Good value for the money. You'll probably need to adjust yours.
I run a small cabinet shop - mostly hobby but some commercial. I needed to make a 1 1/2" thick set of swinging bar doors for a customer. This router set did the trick. I don't need to make thousands of these doors so super high quality wasn't that important. But I did make the set of doors out of oak and the set remained sharp.The rail end pieces set depth with a bearing so I machined all those first. Then the stile grooves have to be adjusted for depth with the fence on the router table. I set up to take 1/2" at a time - leaving a little bit for a third pass. Once I got done, the rails and stiles would not mate up. On the stiles bit, there are washer shims between the upper and lower. 3 are 0.020" and 5 are 0.010". I used a 20 and a 10 on each side which gave a perfect fit.These are hefty bits so turn the router speed down - I was at 2 out of 5 and slow your feed rate. I would recommend making multiple passes.Overall, I would recommend these bits!
L**B
It worked for one time!
It went dull after first use and started burning through the wood, but no cutting. Save your time and money and buy something worth it.
Trustpilot
3 weeks ago
5 days ago