[2PCS] MacBook Air 13.6 Trackpad Protector Cover Skin for 2025 2024-2022 MacBook Air 13.6 Inch M4 Chip A3240 M3 A3113 M2 A2681 Anti-Scratch Waterproof Touch Pad Cover Protector Skin Accessories, Clear

To begin, Im NOT a paid reviewer of any kind. Just a regular dude trying to be helpful as I rely on reviews alot myself.While i did get a bunch of air bubbles in mine, it works perfectly and I've had it on my Macbook Pro 14" trackpad for a couple years now and going strong!Solid value, feel is natural, and goes on rather clear and transparent. I do recomment.

Protects as it should. I have a few bubbles when I installed but it doesn't bother me, other 99 other problems to worry about. Bubbles don't affect touch performance at all.

Muy buena calidad de adhiere muy bien y no se tiene problema con el táctil

Everything is 5 stars for this protector except installation. Someone in a prior review published the numbered instructions below which I followed - Thank you!I'd add to APPLICATION #2: as follows: "It's not enough to **get started** w/ a perfect fit on the left side & upper top." I recommend you do this AND make sure the trajectory of the protective film aligns w/ the top of the track pad cut out before you commit. If you don't have perfect alignment at start, the film will ever so gradually end with it overlapping the trackpad.The attached pic illustrates my first try & what happens at the end of the install if alignment isn't perfect at start (look under the Option Key). Good luck!PREPERATION:1. Clean the track pad w/ glass cleaner before you clean with the alcohol pad.2. Clean the track pad w/ the provided alcohol pad next. Place the alcohol pad back in the sleeve in case your 1st try doesn't work out.3. Dry the alcohol fluid w/ a cloth suitable to clean expensive eye glasses.4. If you have a magnifying glass / glasses look @ the surface. The cloth in step 2 above should remove all wetness, dust & other unwanted micro debries.APPLICATION:1. It's critically important to understand this protector is cut to fit the trackpad EXACTLY. Hence #2 below...2. Make SURE you start w/ a perfect fit on the left side & upper top, applying the film left to right (IMO this is way easier than applying top to bottom).3. Adhere the film & remove bubbles as you apply the film while releasing the #1 labeled protector - slowly. This means - see #4 below...4. Applying the film on the left side of the trackpad while pulling the #1 labeled protector to the right is a little awkward. Remove the #1 protector slowly to tackle the job a little bit a time.5.Upon completion, use the included cardboard piece to remove bubbles. Return to the invaluable eye glass cloth and use w/ firm pressure from your finger tips to remove bubbles / pockets. IMO the cloth works better than the cardboard & doesn't scratch the protectors or the film.6.Almost done. Don't remove the #2 protector. Let it set over night. The next day - reinspect for unwanted streaks, bubbles or poor adhesion.7.Finally, remove the #2 protector and use the eye glass cloth once again to insure you have great film adhesion / no future bubbles. The cloth won't scratch the film (Don't use the cardboard).

Vero good product

I seen some reviews saying that it was hard to install and it didn’t fit their MacBook Air. It fits my MacBook Air just fine. The only thing that was hard about putting it on was getting the plastic off the sticky side. And pushing out all the bubbles. But all in all it works great. It doesn’t change the sensitivity on my touch pad and now I don’t have to worry about my nails scratching it.

This didn't cover the entire trackpad. Also, there were still bubbles even when i followed the directions and the op and corner didn't stick.There was residue around the edges, on the trackpad where the sticker didn't cover from applying it, that attracted dust and dirt. I live in Colorado and so this is very bad but it wouldn't be good anywhere.I removed it. I was glad I didn't keep it on because there was sticky residue left on the trackpad and if I had left it on there for longer, there wold have been more.The feeling of it is good. It was soft and sensitive. If it weren't for the problems I would like it a lot

I like the protector very easy instal for me. I have been installing my screen protectors for year. the Only thing I don't like is that the protector has a matte finish a bit textured similar to a low grit sand paper and I am sometimes sensitive to some texture. I don't like that if you don't want the texture don't take off the protector film. the protector filter on the matteish tracked protector is smooth, I do not know how it will wear with time tho. Just being completely hones, still it does it job protect the trac pad, easy install if and the protector is flexible I thought it would de more rigid