11025 1 1/2" Diesel Auxiliary Install Kit

What can I say Great package to the job, the only thing I would recommend Is that the hose to be a more UV friendly hose and/or have a specific section that is covered so that way the UV light does not crack it. Had my installed for a couple months now it does its job absolutely wonderful, I did change out my ball valve though so that way I can get a 90° angle with a bigger handle, but the rest of it still does its job perfectly, I do just recommend that they make the hose more compliant with being able to get even by the sun, as I did have to throw a rag on top of the section that is exposed to daylight in order to prevent the sun from cracking it, as a piece of tubing that I left out in the sun before I installed it did show signs of sun crack, so I do recommend that you find a way to put a covering over it or just a rag or something to assist it there so that way it does not get eaten by the sun

So far so good. Installed yesterday and everything works great. Fit my 2007 Ram 3500 just fine.Take note that if you have a bed liner depending on the tank you get you will want to put an elbow on the tank and run the fuel line out in a different spot vs straight out from tank.I used a piece of 3/4 heater hose to protect fuel line going through bed of truck.

I bought this product instead of building my own, because I was under the impression that it would be easier. But after installation, the ball valve began to leak and the very cheap hose clamps began to loosen and leak as well. I feel that for price they could have supplied better hose clamps and better constructed ball valve assembly. I would recommend that you purchase the parts individually yourself and don't waste your money on these cheap parts

Combined with a 50 gallon RDS auxiliary diesel tank, it has greatly extended our range when towing our camper, literally no more worries about making it to the next fuel stop in the middle of nowhere.I can't speak to the install process, I paid a local diesel shop to do the work, but they didn't complain and came in right on the low end of their install quote, so I don't think they ran into any problems.

On/Off valve leaked. aluminum body with check valve to tall to properly fit 2017 F250. installed 90* fitting withelectric solenoid for shut off. if did over again would just tap a fitting in fuel fill line tube. Thanks

This product is terrible had to pay mechanic twice to install. First one leaked from time it was installed. Company wouldn’t respond to my email about the problem. Had to buy the whole new kit just to get the value part. Had to pay again to have it installed. Works worse than the first one. Pours fuel all over in truck. Don’t buy this junk! I would give it a negative stars if they had them.

Installed easily, had to shorten just a little the intake pipe on just one end to allow the provided thick rubber hose to slide in! Use lithium grease on rubber and easily slide into the pipe. Working great.

Doesnt come with nearly enough hose to route to filler neck, not only does the ball valve leak, fuel starts pouring out even faster once it overfills. Lost $200 of diesel because of this. I disregarded the previous warning and reviews and i paid the price.