f:{"metadata":"$15:metadata","error":null,"digest":"$undefined"} 35:T77a,Size : 32.5*22.6*7.25mm
Working Voltage : DC6-24V
Working Current : 130mA(25mW)/230mA(200mW)/280mA(600mW)/12V
Working Frequency : 5.8G
Working Channel : 48CH
Transmit Power : 25mW/200mW/600mW/Turn OFF adjustable
Transmit Distance : 200m(25mW)/1.5km(200mW)/5km(600mW), in open area with 4-leaf clover antenna

Features :
Configurable from Betaflight/flight control/osd
25mW/200mW/600mW and Turn-off (PITMODE) switchable
5V BEC output to provide power to receiver, camera
Zero interference when power on or switch channel, to avoid interfere with other pilots
Automatic overheating protection, prevent module damage
Channel, power and Pitmode mode are configurable by osd.
Channel and Pitmode mode are configurable by PWM
Autosave power setting
Able to configure the setting from extended button.

Instructions :
Power Switch
When powered on, power setting is the same as last time you used.
*Long press Power Button, switch among 25mW,200mW and 600mW
*Short press Power Button twice, turn on or turn off transmitting(Pitmode). "TX" lights on indicates tranmitting, Flashes means the power is off, (regardless of the status of other 2 LEDs)
"TX" light on indicates 25mw, "TX""200mW" indicates 200mw, 3 lights on indicates 600mw

Channel Switch
*Long press Channel Botton, switch among A-B-C-D-E-F , short press to switch between CH1-CH8
*When connect to receiver with PWM cable, the digital display is on, you can configure your transmitter to switch between channel 1-8 or shut off the power. If no further action within 3 seconds, it automatically go to button configure mode.

Note :
Best connect the antenna before you power on it to pretect the module.
Package Included :
1 x 5.8G 48CH 25mW/200mW/600mW FPV Transmitter
40:Taf5,