Rain Guard Water Sealers - CLEAR-SEAL - Professional Sealer and Finish Coat For Decorative Concrete, Stone, And Other Masonry Surfaces - Acrylic Urethane Coating - Low Gloss - Ready To Use - 1 Gallon

Amazon prompted me for a review so here it is...I'm no kind of expert on sealers. I've only used 3 different brand water-based 100% acrylic sealers before trying this sealer. At this point I've been using it (experimenting) for about 2 months now. I'm using it to protect my outdoor cement artwork from weathering, so that is the extent of my experiences. My aim for any of these sealer products is to apply multiple coats to a vertical surface and to bring out the colors and to achieve a very deep wet look while also offering weathering protection (no foot traffic to worry about). Compared to the other brands (which are all 100% acrylic), I find this Urethane/Acrylic sealer to go on as easily (even on vertical surfaces), dry very fast between coats, and give a slick (almost waxy type) 'feel'... the more coats I apply the slicker the feel. Where I find it really differs from the other sealers is... its very clear (doesn't darken colors like the other acrylics I've used) and its highly glossy (more so than the 100% acrylic sealers I've used so far). It does bring out the colors a little but without darkening them... its hard to describe but it appears like the 100% acrylic sealers intensify the color much more because they also darken. For my work, I prefer the darkened colors yet I also want the very high glossy wet-look and durability this sealer seems to give therefore I've settled on applying two base coats of 100% acrylic with 47% solids (another brand) and then topping it with 4-6 coats of this urethane/acrylic sealer. What I end up with are colors that are very intensely deep and look like they are under a layer of water... my works are left with a wonderful slippery feel to them and it seems like it will not ever wear off... Its exactly what I want. Please keep in mind the number of coats I am applying and the effect I'm trying to achieve with my artwork. Because my needs are so specific and not really mainstream for this product, the context of my 5 star rating is solely from the standpoint of my expectations and needs. If you are going to put down a couple coats to protect a patio or walkway my guess is it will give better protection and durability than the 100% acrylic products while also being noticeably glossier and slicker and the colors will be truer and not enhanced.A Helpful Note: When applying more than two coats, each new coat will tend to want to bead up on the surface of the previous coat unless you do a light sanding of the previous coat.

Goes on thin, I use a brush on my painted statues all concrete.. on a vertical surface, it drys in about an hour outside and becomes rain proof in a couple hours..on a horizontal surface. It would need more time.I put a new coating on every year, keeps me from having a repaint the statues often, great product…

Works well and fast... is not a hard surface but a protective surface. Like a film screen protector on a phone instead of a epoxy coat. Put it over newly painted surface w/beautiful outcome. Needs at least 4 coats but it was dry to walk within an hour after each coat. A little goes a long way. I found rollers to work better than garden sprayer. Puddle spots will turn yellowish clear if there is a deep section you go over and let it pool.

It appears to protect against water. The high gloss finish I wanted Is non existent. It l@@ks great when applied. Then it dries. To a dull natural finish. **Not why I purchased this or did all that prep work. Big waste of time and money. Fairly sure it will make it difficult if not impossible to apply a product that is "high gloss finish" as this was supposed to be. So the front of my house will never look as I wanted. Not in my life time. Beyond upset with this product.

This product was so easy to use and it looks great! I didn’t notice any streaks or anything because I was concerned since it was a spray and walk away item that it would streak but it has a very smooth finish. I’ve used this on several things so a couple of things I learnef…… if you are applying to items where the spray could pool I did use a dry paint brush to lightly spread out the product. Also, I sprayed this on my wood shutters without taking them off the wall and it splashed a little on my windows which zi should have wiped off better but since I didn’t I ended up having to use a razor blade to scrape the dried clear coat off my windows. Other than those two things the product is very easy to use. It’s a lot better than having to brush it on everything that you use it on.

This has no gloss value at all. It says "high gloss" but there is no gloss factor even after several coats. Aside from that it is a decent product with no yellowing or bad smell. Overall not bad.

This product is thin and milky looking and dries to a hard, clear, subtle shine. I am using it on stenciled floors inside my house and it works beautifully. It is easy to apply, is not too shiny, does not have an odor, cleans up well, and does a great job protecting my floors. I highly recommend this product.

I painted the tile on my porch. Then I used this to make the paint stay better. It hasn’t changed the color, the tile still has dimension, and it’s not slick. Even when it’s wet the tile doesn’t become so slippery that you feel like you are going to fall.

Worked great

Product is very thin. Still leaves tire marks even after 2 months? Don’t waste your money.I would have returned it but I waited a month before I put my cars in the garage, to make sure it was fully cured. Return window had passed.I repeat don’t wast your money.

This does not leave a shine like you would expect as a sealer , mistake is i bought. 2 jugs , will.sell it cheap , i put this on as per instructions , Save your money Dont Buy it IMO

The media could not be loaded. No good result just waste of money