J-B Weld8272UK MarineWeld Tubes 57g (2oz),Grey

used to stick magnets back into a magneto on a motorcycle, charging system works now and combined with the putty the magnets will never move

This is a great product. Items repaired with this stay fixed. needs a full 24 hr setting time but once set it is almost as good as an actual weld. This is a must in your toolbox.

Seems doing the job at 1st glance. Easy to use, mix, comes out as grey colour, can be worked with moist hands to the shape you want, smooths easily again with moist assistance, handy tubes at package, I hope water resistance will last for long. Attention, when dries can break easily if knocked hard, it is the same with all hard materials-what cannot bend breaks.Bit expensive in price. Useful for the purpose. Would buy again.

Incredible stuff, had helped fix many a little hole on my 20 year old truck 👌🏽

Product works great and sealed the crack in my A/C condense tank.Good preparation is required so sanded area to provide a good key and cleaned well. Mixed thoroughly for 3 mins, applied thickly, left to dry and harden for 48 hours and no more leaks.Repair on underside so didn’t need to make it look pretty.

Excellent adhesive

Wasn't what I was expecting, more of a paste than a epoxy , like chewing gum, hard to work with.

Needed to repair a cracked granite sink which had completely split in 2 in the middle. After doing some research I settled on buying this JB Weld marine epoxy. Super easy to mix and apply, it is a dark grey/graphite colour when mixed at the recommended ratio. As this is not a fast setting epoxy, after application, I just joined the 2 pieces together and left it alone on the floor. I tested it about 12hrs later and it was set however I left it for a full day before handling it. Given the weight of the granite sink this has extremely strong adhesion - the drainer section which had cracked off was able to suspend mid air with no issues when I placed the sink up right on the floor. I installed the sink a couple of weeks later so it got some additional cure time though not required. Very happy as I was able to fix the sink for less than £6 rather than buying a new one! I would recommend taping and wiping off any smears/excess asap which I sadly didn't do. It's hard remove once it is set and I was unable to remove the smears I made as shown in the photos.