GuteautoBattery Terminal Connectors Top Post 12V 3-Way Battery Terminal Ends, Copper Plate, Positive and Negative, Applicated in Car, Boat, Van, and More

Great for my motorhome as have many feeds coming from batteries, keeps things tidy, protrude a bit above battery so could be a problem if very tight for space.

Sturdy good😊👌

I was expecting something a bit more solid and heavy duty. They do the job although I'm wary of overtightening the post clamps.

Good quality and did the job much better than the ones that came with the leisure battery

Well worth the money

(I haven't installed the positive one yet, only the negative. Not sure I will use the +ve one.)They feel light and flimsy, but it fits and grips, and it conducts OK. I measured 32mV across one while cranking, which I estimate at 490 Amps. That means the one I installed is 65 microohm which is better than I expected... but it's still dissipating 15 watts just in that terminal.They're not "handed", so the negative needs the nut towards the centre of the battery and positive needs it towards the outside. What do I mean? Sit and think about which way around they have to be so you can get a nut driver to tighten the clamp.Now I look again, I see they're available for much less than the £9.99 so I overpaid there.However the biggest problem is I have no rubber boot to cover it, and don't expect to find one. The chassis is negative so I'm OK with that being bare, but the positive has to be covered by something. If it ever gets a spanner dropped on it, there must be insulation.Update 2023-09: I found a huge boot elsewhere that looks promising but it's not tall enough. Maybe better than nothing, but I want all the metal covered against that scary day someone drops a spanner on it. Sorry... it's the wrong thing and I've removed a star.Either I have to make my own boot or I'll go back to stacking the ring terminals on one bolt.

They worked great.. not very heavy but worked ok

This pair of battery terminals are great if you find that your car or leisure battery only has a pillars at the positive and negative terminals and does not have threaded bolts as well. Threaded bolts are great for attacking any cables that have a ring terminal on them. You'll need a 10mm spanner for the 2 smaller bolts and a 13mm spanner for the larger central bolt.Good points:1. Well-made. Nice and strong;2. Clamps firmly onto the lead pillar terminal via a bolt;3. Three threaded bolts with locknuts which allow multiple cables to be attached;4. They are colour coded in black and red, so it's easy to distinguish positive from negative.Bad Points:None. I'd buy these again.Helpful Hint:Ensure that you clean the battery pillars with fine sandpaper or emery cloth before bolting these terminals, so that you ensure you have a sound electrical connection.

Cleans up cranking battery where all electronics wires usually go to the main wing nut post, makes wires easier to identify

Ich habe vor kurzem die Batterieklemmen ausprobiert und muss sagen, dass ich beeindruckt bin. Die Klemmen halten sehr gut und ich habe keinerlei Bedenken, dass sie sich lösen oder die Batterie beschädigen könnten. Besonders hervorzuheben sind die selbsichernden Muttern, die sicherstellen, dass die Klemmen auch nach längerer Benutzung noch fest sitzen.Die Montage und Demontage der Klemmen war sehr einfach und unkompliziert. Ich musste keine zusätzlichen Werkzeuge (außer 10 & 13er Maulschlüssel) oder Hilfsmittel verwenden und konnte die Klemmen schnell und effizient anbringen und entfernen.Insgesamt bin ich sehr zufrieden mit diesem Produkt und würde es jedem empfehlen, der auf der Suche nach zuverlässigen und langlebigen Batterieklemmen ist. Die hohe Qualität und das praktische Design machen dieses Produkt zu einer ausgezeichneten Wahl für jeden, der seine Batterien sicher und einfach anschließen möchte.

Ottimi ben rifiniti ottima fattura non robustissimi nell attacco al polo

Verkligen dålig kvalite

Buenos conectores para la función requerida.