B-Tech BT332 Home Cinema Speaker Wall Mounts (Pair) in Black

I got these for my home computer setup and am delighted with the results.The product is packaged with all the attachments as described. The instructions are very clear. The packaging was plastic beneath the cardboard box and needed scissors to open.Importantly for me - which I hadn't picked up from other reviews - there is a hole in the middle of the mount for the main attachment, and as well as the clever sliding on mechanism for the holder itself; it was possible to thread the speaker wires through the mount and out the back (In this case into a hole into the wall cavity). The hole was large enough for the chunky wires on my Bose Companion 5 speakers that I mounted which was a massive bonus. These seemed to be the only mounts on the market that fitted the bill (small enough to be obscured by these little speakers).The strength of the pivoting ball is good and easy to adjust and readjust using the plastic knob on the fixture. The wall plate was simple to affix - and can be done horizontally or vertically without problem. The supplied wall plugs and screws worked just fine (Unlike with other things I have purchased in the past).All in all an excellent set, and perfect if you are looking so wall mount small speakers discretely like myself.

Have just gone back to a 5.1 set up after dabbling with a soundbar. Wife is very fussy so needed to be as discrete as possible with the speaker placement. Bought a pair of these for the fronts, and they are perfect for the job. Hold the speakers nice and close to the wall, and are "invisible" when in our seating position. A variety of fixing screws and brackets come with them so they should suit most speakers. I have Tannoys which are quite weighty for their size and have two screw hole mounts in the back. I fitted by using just one of the screw holes and they are proper sturdy.The balljoint type fixing allows full movement of the speakers so you can toe them in if necessary, and angle them up/down if required. Just turn the thumbwheel to tighten up and you're good to go. Highly recommended for a neat and tidy solution for your surround system. I have my surround speakers on bookshelves but would have no hesitation in buying another pair of these for them if I ever required them.

Bought this for the satellite speakers for the Wharfedale DX-1 HCP. Pretty quick to install and came with the M6 screws I needed to attach the speakers to the bracket. I have had to really tighten them to keep them at the tilt angle I like as they were struggling to keep level. The speakers only weigh 1.8kg so I can understand why other reviews have mentioned that with heavier speakers the brackets struggle to maintain the set tilt level.

I had a pair of small surround sound speakers to mount and this mounting kit was the perfect solution. The mounts are small and come with all the wall mounting screws and rawplugs, as well as speaker attachment screws.I was able to mount both brackets on wood which made the process of installation much quicker and easier than if I'd had to drill my walls. I used the supplied wood screws and the brackets were up in under 5 minutes. Next I fixed the speakers to the speaker mounts (these slide easily off the wall brackets) and put them back onto the wall mounted brackets where they are retained by a screw on top. Finally I loosened the screw that allows the speakers to be moved into optimum position before re-tightening it.All done in ten minutes meaning I could now go ahead and run through the surround sound calibration. I've tweaked the position of both speakers since then and I'm happy that the brackets are holding them firmly in the positions I've put them in.Great value for money and perfect for smaller speakers (mine are about 25cm high, 10cm wide and 10cm deep)

Very pleased with the product. My rear speakers look and sound the part now. Swivel and tilt mechanism is easy to operate. The instructions provided are clear and concise and I had them up and sound playing within an hour.Glad I managed to get a black pair to match my speakers and they look unobtrusive on the wall. The lines are contoured so they actually look quite elegant.I was slightly disappointed with the wait time as they took just over a week to arrive, however was worth the wait!!

The brackets arrived this morning and I have only had a chance to do a prefit. They were ordered for the rear speakers in a Home Cinema system with the intention of mounting the front ones on unit on each side. I am so impressed with these that I have ordered another pair for the front left and right speakers as I think they will look far better. Everything that you could want is provided, with a fitting plate for twin screw speaker mounts if you need them. I was also impressed by the size as they were much smaller than I expected, which, for the record is 40mm wide - 75mm high and 65mm from the wall to the back of the speaker. These really are an excellent buy.

Speedy delivery. Great brackets for small speakers. Used it to mount Boston Acoustic SE speakers as the mounts supplied were not suitable, unable to turn them by 180 degrees. These suit the purpose, very easy to install and degree tilting facility also useful.

I have 5kg speakers "Monitor Audio " 50 Bronze. I have put the brackets on the wall , mounted the unit to the speaker. But once you hang it they are not strong enough to hold up the speaker .As i have drilled holes in my wall i have no option but to try and make them work. So with a pair of pliers I have had to tighten the off the wall and keep hanging them until they don't move . Which means you can not adjust them!! I have to take them off and undo the screw try and adjust re-tighten and hang again.I would return these, but I have damaged them with the pliers due to the pressure needed and its also took me 15 attempts to get them right .So I would not recommend these for 5kg speakers