Compatible GTO Mighty Mule RB741 Remote Control Transmitter (2 Pak)

I have been using Mighty Mule gate openers for ten years. When I suddenly needed an additional fob, I was surprised at the contradictory reviews for this product. Either these worked out of the box, or a series of steps were required to reset the gate opener for these to work, or these did not work at all. Based on the reviews alone, it wasn't easy to make a decision to buy.Here is everything you need to know to make your buying decision.As you can see in pic2, this product (on the right) is identical in size and appearance to the MM fob (on the left).It is highly likely this fob will work with all MM gate openers that use this type of fob.If you still have a fob for your gate opener, working or broken, you do not need to take apart your gate opener to use this product.In this case, there are two possibilities: your gate opener was installed using factory settings and this product is likely to work out of the box; your gate opener has a custom security code and your existing fob is used to set the code on the new fob. If the new fob doesn't work out of the box, remove the screws from the backs of both your existing and new fobs. The security code is set by the nine tiny switches, see pic1. Set the new fob to exactly the same switch positions as your existing fob. NOTE: switches are three position: +, 0, -. Each switch must be exactly set. Now your new fob will work with your gate opener.The other case is that you no longer have a fob for your gate opener. You must open the plastic enclosure of your gate opener, which has the same block of security switches you'll use to set your new fob.Bonus! This fob seems to be more powerful than the factory fob and perhaps activates the gate opener from a greater distance.

I got these because I wanted a good remote that went on my key chain for my mighty mule gate opener.I usually sit in front of my gate and push the mighty mule remote 3-5 times inching closer and closer to get it to open. Most times I even have to unclip the mighty mule remotes and point them directly at the opener to get it to work... Well then I got these remotes and man they are all around better. They work from waaaaay further away, they work waaaaay more reliably, and they were easy and fast to program with the learn button.The only downside is that they are a little bit big to put on your key chain. If you dont mind a clunky keychain then you can remove the clip and its no big deal at all. Or you can keep the clip and put it in your car and skip the key chain part.I originally bought a universal remote that was much smaller but it was not compatible with my gate. It cost me $30 for 1 remote. I returned it and bought this one for the same price with 3 remotes.

These are way better than the new mighty mule 3 button remote. I have an older model mighty mule gate and it was a chore programming a mm 3 button. And you had to be within feet of the gate for the remote to work. These single buttons are a breeze to program and work from a good distance away. Much better quality and value as compared to one mm 3 button for the same price.

These remotes shipped out the next day. All three remotes were in their own boxes and those boxes were in a larger box. Super easy to set up these remotes from my mighty mule remote. Just copy the pin placements These remotes have 9 pins vs 8 pins on the mighty mile. You can't leave the last pin in the middle. You must put it up or down for it to work. These remotes came with a battery and they work 3 times farther away than MM remote. I would buy them again if I ever needed more remotes. I believe most bad reviews are people not reading the online intructions and not moving the last pin to up or down. Do some research before buying as I did and you'll have no problems with these remotes.

I bought these, programmed them to the main gate at the sheriffs office where I work, and sold them to the other deputies. They work excellent

I HAVE BOUGHT NINE OF THESE!!! YES, I SAID 9. THESE ARE ALREADY PROGRAMMED TO YOUR GATE, SO OPEN THE PACK AND CLICK AWAY. THEY WORK BETTER THAN THE ONES YOU BUY FROM TRACTOR SUPPLY AND COST A THIRD OF THE PRICE. I'VE NOT HAD ONE PROBLEM WITH ANY OF THESE. THEY ARE IN ALL OF OUR VEHICLES, ON OUR TRACTORS, ON THE FOUR WHEELER (IN THE RAIN ALTHOUGH, YOU MIGHT NOT WANT TO LEAVE THEM IN THE RAIN), ON OUR GOLF CART, LIKE I SAID, I BOUGHT NINE LOL... I WILL BE BUYING MORE FOR MY FAMILY TO USE.

I bought the 2 pak single button transmitter FM 135 in hopes it would actually work with my Mighty Mule Gate Opener, MM371W. The MM371W was installed late March. After several months of trying to use the MMT103 digital transmitter which was supposed to work with the gate opener and the garage door opener but did not. I was frustrated and regretted purchasing Mighty Mule products. The MMT103 was very inconsistent. At times I could be 70 feet away and the gate would open. Other times I had be within 6 feet. Sometimes I could be in my vehicle, it would work, other times I had to get out of my vehicle. Changing to a new battery did not help. It never worked with my garage door opener. Then it stopped working completely. It had only been in-service for about 4 months. In my experience, very poor piece of equipment.Received the 2 pak of FM135 transmitters 31 August. Followed the "How To Learn a Transmitter" instructions and got one, then a few minutes later, two transmitters opening my gate from inside my vehicle about 60 feet away. AND they consistently open the gate!

Worked great and a quarter the price of factory remotes

Works way better than the remote that came with the system!

We purchased these as a replacement.

Works just like the original

Works like a charm. Now we have access in a vehicles instead of using the keypad.

Remotes work OK. But quality is not the best.They are much cheaper than the official. Mighty Mule versions, so you get what you pay for.