5Pcs 12mm LED Metal Indicator Light AC 110V-220V Waterproof Signal Lamp (Red)

I used two of these red LED indicator lights when I rewired the control box on an old Bobcat to replace the old 12 volt incandescent bulbs. These are much nicer looking and are working perfectly.

Relatively bright and stout!

Works perfectly for my freezer.You can also use this light by connecting it to any 110V electric line/switch (such as basement light) and it will visually indicate if your basement light is turned on or not.

nice lights, installed easily and look good. Evenly lit across the front of the light. My only concern is the wires are thin, sure they draw very little current, but mechanically I'm concerned about the wires in a mobile installation.

Since these appear to be dual 12/24v, my guess is that the true full brightness is not realized unless feeding them 24v power. I am using. Them on 12V and they are not blindingly bright like I have seen from some other native 12V indicators. They are however plenty bright for most environments to clearly see it’s lit, even with plenty of surrounding daylight. Not a huge deal but it would have been nice to see for purposes of long range visibility.In my case, these are in use in the bottom of some external metal enclosures housing fiber optic network switches and some other communication hardware. These feed off of a common 12V power supply for the enclosure. If for some reason the power supply dies, it will be easy to tell with no indicator lit.The entire housing and lens are made of plastic including the backing nut. The lens itself appears so have a diffuser on the front. Looking at it straight on and at a slight angle, you can see the diffuser pattern. It is also beveled out as well/not flat.

It was great to find this type/style of light available in AC products. Without needing an adapter. Have used them in several custom lamp creations. From taillights in a toy car. Glowing ends of a light saber. To the latest use as simulated embers in the base of a Phoenix Rising themed lamps. And, yes, even as indicator lights in a funky 50's Chevy Console cluster lamp.Definitely will continue to use these for accent lights in future designs.

It did work for hisense freeser the wires are a little too thin, just keep that in mind.

Works great

Nice and bright. Just what I expected.

I used the 120 V Green LED on my chest freezer to replace a burnt indicator. The original power indicator was slightly smaller than the new LED so I drilled out the base plate and put the new light. I soldered the new LED in and protected the connections with heat shrink. The LED is a quality part and provides a bright power indication for my chest freezer. Great product.

The ones I got don’t even work very unhappy

Produit conforme à la description, déjà installé, fonctionne parfaitement

e' perfetto per l'uso che ne devo fare