Amazon Brand - Eono Standard LCD 3D Printer Resin, Fast UV-Curing 3D 405nm UV Resin Photopolymer Resin for High Precision Rapid LCD 3D Printing Clear 1000G

I've used eono filament a few times and had good results but this was the first time I used their resin. I thought the little 500ml bottle was quite neat, it has a long spout with a slit in it which pours resin out nicely and without any mess. I use a saturn mono printer with exposure times set at 30s for the bottom layer and 2.3s for the normal layers @0.05. It wasn't too smelly while printing, much less than other brands. Once it printed, parts weren't as brittle as other resins too, some parts had a slight flex to them which prevented them snapping. But overall, the crisp details were impressive, and it was very white. I cured for 30seconds and didn't get too much yellowing or discolouration. I'll be using a lot more of this resin.

Really good quality the resin worked perfect on my mono X

Not one print came out worth while all had failures soon as I swapped resin they all came out fine I would not buy this crap it will only disappoint and waste money

In 500g i have only had 1x successful print.... Gone back to elegoo and anycubic resins. Went to exposure as high as 90s and wouldnt stick to plate... Switched resins (elegoo/anycubic) and printed without issue at 26s exposure.I must have had a bad resin but it just wouldnt form.20 tries with this 1x successBack to 90% success rate with elegoo and anycubic. The fdm stuff wasnt that good.... This is worse for me.I wouldn't recommend (3 years fdm/resin, 5x printers).

This Eono white resin is one of my favourites, from the package through the finished product. The square-sided bottle, with the tight pouring spout are fantastically designed. The flat sides make storing them on my shelf much better, as I can pack them more densely and more securely with less wasted space between. The spout is ideal for well-controlled, almost laminar, pours, creating few drips or splashback. It cures well and was easy to calibrate for. I was pleased that the opacity of the white pigments works well as both as a base for painting on, or as crisp white model finish in its own right.

This Eono fast curing resin comes in a new style bottle which is a much improved design and welcome change from the old silver ones (which I found tended to leak) so top marks for the bottle.The resin itself is very strong, stronger than Elegoo abs like resin. I was expecting it to be pure white but it has a slight yellowish hue to it, so it's more of a creamy white. Overall performance is good and it prints well at lower temperatures but I did note some small white particles around the finished model, so I had to do a little more cleaning up than usual to remove the bits. Detail was decent though, so overall I'd say this resin is good value and I am happy with it.

Easy to use and works excellent!It is qualitative and great value for money!Recommended it!