Hornit CLUG Bike Clip Holder Wall Mounted Rack - The World's Smallest Bike Rack (MTB L, Fits tyres: 44-57mm,White/Black)

I bought an XL, a PLUS and a STANDARD one for both mine and my wife's mountain bikes. I had wanted one of these for a while but they never did the plus size fitting that my tyres are - until now. The STANDARD one fits my wife's bike perfectly (2.25" tyre). I ordered the XL and the PLUS size for my 2.8" tyres as Hornit recommend a 'snug fit' on their descriptions stating a 2.8" can be a 2.7" in reality on the tyres.When they arrived, I used the tyre graphic guide on the box (great design packaging by the way) and my 2.8" tyre fitted exactly in the graphic of a 2.7" size. So bear this in mind when buying or fitting!! Hornits recommendations on this were spot on! They do state this on their write up and on their website. I decided to contact them anyway, as I wasn't sure whether to fit the XL or the PLUS size based on the graphic tyre guide.I spoke to Bea Preston Ellis from the company who was fantastic and answered my question of whether I should use the PLUS size CLUG (2.8" - 3.2") or the XL CLUG up to 2.7". Bea recommended the XL size, stating it is better to have a more snug fit.. I fitted it that day and Bea was spot on! My 2.8" fits into the XL size perfectly.Amazing product, simple and effective design. Looks really stylish, easy to install, really only takes 5 minutes per bike. Thank you Hornit for this design and thank you Bea for your advice. I totally recommend this product as a simple and effective way of storing your bikes in your garage or home.

I like good product design when I see it. This has it all from its cool name, excellent packaging to the product itself which is simple, robust and practical.I mention the packaging because that's just amazing and shows that every detail has been considered. There's a tyre gauge on the side so you can check you have the right size Clug before you open the packet. The box then becomes the drilling template and even catches the drill dust while you drill.Installation is very simple, two holes, two plugs, two screws and clip the cover into place. Done.We have bikes stored in a big cupboard. It's a fairly tight space so one bike has to stand vertically at the back for the others to fit in. Balancing it was possible but inevitably it would slip when moving other bikes around it and pedals would get caught in spokes and chains, very annoying. The Clug is the perfect solution. The bike is held in place, vertically. It supports its own weight on the floor but the Clug holds it in position. No more issues with bikes getting entwined with each other.Would recommend Clug very highly.

I've been looking at these for ages and finally bought 3 of them, 2 hybrid and 1 Mtb. The sizes at the low end of the mtb and max on the hybrid is only 1mm different so I have my sons bike is loose in the mtb clug but it still holds. If anything it's super easy for him but I am concerned it will fall out and knock the other bikes.My wheel was the max in the hybrid and is a tight fit so over time I am worried this may damage the plastic but I will see.The downside to these products are the screws that come with them, I had 1 snap as I was nearly done. I was unable to get it out so had to work around it! For the hybrid clugs I swapped out 2 of the screws due to poor quality.Pros, they are small and easy to install if you have no isues with the screws, they and quick to use and easy to clean.Cons, concerns over wheels being loose if your wheel is at the lower end of the size that it may fall out, poor quality fixings.

This is a great product, well made, easy to fit and makes most of the other rack systems look geriatric. This deserves some kind of Nobel prize!

Brought this to store my bike out the way in my room, considering its 2 pieces of plastic which snap together I though it was a tad steep at the price I had paid. Following, the instructions which came with the product, it was quick to see that the rawlplugs werent much use, and neither were the screws which were provided, due to the screws not biting at all. Also, the rawlplugs were just in general useless.Once I had used my own screws and rawlplugs for the correct material, I had the rack up for around 2 or so weeks in which i took my bike in and out around 4 times, well yesterday the rack pulled itself off the wall, rendering it unfit for purpose.would i reccommend it? nope, I wouldnt. Its a good idea, just not fit for purpose if you regularly use your bike.

I bought two sizes; mtb (44-57mm) and mtb xl (58-69mm). I tried one bike with 58mm tyres in the mtb size and it did fit but was very tight and required a strong push to engage and remove the tyre, I would think repeated use in this size bracket would probably lead to stress cracking. In the mtb xl it engages quite easily, feels a little loose but does hold the bike without issue. My 2nd bike has 55mm tyre and this fit nice and secure in the mtb size. I would recommend measuring your max tyre width accurately with callipers and buying the recommended size. Installation is simple and item appears good quality. If it fails in future i will update this review.

It’s tiny and unobtrusive (when not holding a bike) and that’s a stand out feature.The jaws gently grip the tyre, so be sure to check your tyre size carefully and if you have two bikes with / or use / different Tyres then treat yourself to two, possibly of a different color?

So I bought these to store my road, hybrid and MTB. Generally they’re pretty good. They’re easy to install and have a great minimalist look when the bike is stored but they have a tendency to not hold as sturdy as I would like. They rely on the tire being well inflated, which is easy enough in the summer when I’m using the bikes constantly, but it is something to bear in mind if the tire loses pressure, your bike will fall. I also had the tiniest bump into my bike and it knocked all of them down, so for that I’m not sold on the stability of them.

Muy funcional y fácil instalación

Muy buen producto y además fácil instalación

Después de apenas 1 año de instalado, la.pieza que sostiene la llanta, se ha roto por completo. Tengo dos bicicletas instaladas en el.mismo ligar, una con un CLUG y esta última, en perfecto estado. El material de este soporte Hornit no es de calidad, inaceptable qué algo que sostiene bicicletas de alto valor se rompa de esta manera. No recomiendo este producto

Útil y fácil de instalar, lo único qué hay que tener en cuenta es que necesitarás poner algo para la llanta trasera que apoya en la pared si no quieres mancharla

Lindo práctico y fácil de instalar