PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive, Smooth Build Plate for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/3 v2 neo/Ender 5/5 Pro 3D Printers

So, I recently got myself the PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for my Creality Ender 3 printer, and let me tell you, it's been a game-changer! I just can't find a single downside to this awesome sheet.First off, this PEI sheet is amazing. It's like a magic surface that helps my prints stick to the bed perfectly. No more worries about prints detaching or warping halfway through—they stick like glue! The consistency it brings to my prints is seriously impressive, and it's made a noticeable difference in the quality of my 3D prints.I also love that this sheet fits my Creality Ender 3/Ender 3 Pro like a glove. It covers the whole build plate, giving me the maximum print area possible. It fits so snugly that I don't have to stress about misalignments or the edges peeling off. It's like it was made specifically for my printer!Now, let's talk about the magnetic sticker with adhesive. It's a nifty little thing that holds the PEI sheet in place on the bed. The adhesive is strong and reliable, so I don't have to worry about the sheet moving or coming off during printing. Plus, the magnetic properties make it super easy to remove and reattach when I need to clean the bed or do any maintenance. It's hassle-free!I must mention the durability of this PEI sheet and sticker combo. I've been using it for weeks now, printing like crazy, and it's still holding up like a champ. No signs of wear or deterioration whatsoever. It's clear that this sheet is made of high-quality stuff.Maintenance is a breeze too. Cleaning the PEI sheet is as simple as wiping it with isopropyl alcohol or warm soapy water. I don't have to spend a ton of time or effort on it, which means more time for me to focus on creating awesome prints!

This works great! Solved all of my PLA sticking issues that the glass build plate that comes with the printer was having. Easy to install and great value.

The media could not be loaded. Works perfectly! It's amazing the part stick with no extra adhesive and easy removal with no effort at all. After struggling with adhesive and scrapers this is a game changer for me

I had stopped using my ender 3 v2 when I upgraded to the S1 plus , it just worked alot better and reliable , well I had a big print and decided I wanted to use both my printers , well I bought this build plate to go with the new CR-touch that I added to the V2, and wow , it's a huge difference , the problem I had before with the original build plate is that prints would stick and would be hard to remove even causing damage to the build plate and the print itself ... after having damage to the build plate it would cause it to be uneven and have bad prints, but with this new build plate which is stiffer the the original it keeps a better flatter surface and with the Cr-touch it's a press print and forget , I've ran 10 prints so far and they all came out perfect no need to worry about adhesion. Very impressed with this product and the price ... I definitely recommend this product.

I ordered this magnetic sheet set primarily based on the claim of it being able to withstand over 100C bed temperatures, as I planned to use it on a printer used mainly for ABS and PETG. It's on an Ender Neo converted to an Ender 3 Pro by replacing the mainboard and removing the CR-touch... I get better results manually leveling and enjoy being able to use the ENTIRE 235mm bed surface (set your bed offsets if you're missing a few mm on the left and front).The magnetism is scary strong - like it'll bite you if your finger gets in the way, and once it's down it is REALLY down. (raise the extruder up out of the way and carefully align the back edge of the PEI sheet with the bed with the front raised about 30 degrees. Once the back edge and corners are aligned, slowly lower the front until it snaps into position). I have had it to 110 degrees with absolutely no apparent reduction in magnetism. The textured surface seems rock solid - more like anodized aluminum than PEI (the Gizmodorks PEI sheet on another printer feels much softer).As to the build surface, the textured side works great, albeit leaving a bottom texture reminiscent of my blue-tape-using days, but I can't get a single thing to adhere to the smooth side. The ONE time I actually got a PLA print with a 5mm brim to stick, it actually curled up at about 6mm thickness... which I have NEVER seen PLA do. I ran the bed at 65 C to get the brim to stick, and apparently the combination of insufficient adhesion and PLA softened by the bed heat (full fan, but this sheet seems to transfer heat to the model much more readily than other surfaces I've used) made it decide to curl. The textured side works great at 60 degrees for PLA, but I got ZERO adhesion on the smooth side at that temperature.Reflecting back on my learning process over the past seven years, relatively thick (over .5mm) Kapton tape was the game changer on my Prusa clones, and I got into the habit of printing PLA on a 60C heated bed (ABS at 90-95 in a 45 degree enclosure). I like the Kapton much more than PEI, but can't find any that's more than a few mils thick. The "official Creality" build surface did nothing for me, and glass - even using the specially surfaced plate that came with the Neo, has always been an exercise in futility for me.In summation, I'm debating ordering another of these, but leaning toward a similar set with both sides of the top sheet textured, or with a double-sided textured sheet and double-sided sheet with carbon fiber stripes. If I order this again at least maybe I'll know if I got one with a bad smooth-side coating.

amazing upgrade from the standard plate that comes with the Creality Ender 3 v2 neo. The texture is great, leaving a cool finish at the bottom. All you have to do it stick it on the build plate as it is magnetic.