Marada Flight Joystick Hotas Mount with Chair Adjustable Compatible with Thrustmaster/Logitech A10C Hotas Warthog, X56 X52 More Stable Flight Simulator Cockpit with Seat, Not Include Gaming Devices

After a few months of ownership i can say that overall this is a good chair for mounting flight sticks, considering the price. The mounting is all metal, and very sturdy. This chair will work for 99 percent of use cases.If you are handy with tools and DIY, you could easily modify this chair for even more specific needs. Ive done light modification to mine so i can have a trackball mouse next to my vkb gladiator. The mounting peices are also quick to remove and adjust while still being very sturdy, which is nice.There are some cons, the main one being that the back support and bottom cushion are not very good. This was easily addressed atleast, I got a universal lumbar pillow for the back to replace the one it came with, and i got a thin cushion for the seat. The other minor issue, which is to be expected in all honesty, is that this chair is very front heavy. Just something to be aware of, could also be fixed with a counter balance.Overall I am happy with this chair. Playing Elite Dangerous in VR with a flight stick setup on this chair is a very enjoyable experience. If you are looking for a good budget flight setup, consider this chair with a couple extra cushions for the bottom and lumbar areas. With that this chair is still the cheapest option avaliable for flight setups.

The chair is pretty easy to assemble, the hotas mounts are as well, I actually ended up using the center stick mount plate on the right side so the stick was closer to the arm rest. I’ll post a picture when I get home. The chair itself isn’t the most comfortable but for the price I’m willing to overlook that, plus Ill add my own memory foam cushion. I have the Winwing Orion 2 Hotas and it fits on the plates provided. Everything is very sturdy and I am sure it will hold up to repeated use. Lastly the Hotas mounts are easy to remove, 3 knobs and they slide right out. Now to find a desk mount that I can slide them into when I don’t need the controls.

Great chair for those who need to be higher off of the floor and easy to assemble and very sturdy. Comes with more than enough hardware to accommodate most add on components. While the manufacturer wasn’t certain that you could mount WinWing Orion attachments, it absolutely does. No problems there. The only negative thing I found was that the base attachments were a little too high as I sat down in it and not to my comfort. I did have to cut about 3/4 of an inch off of the vertical 90 degree brackets. The seat is a bit firm to my liking but, otherwise it’s very comfortable. All in all it was the best choice for my cockpit and setup. Highly recommended it for those who have trouble with getting in and out of lower seated type static simulator models.

use for DCS controllers. its a decent chair with additional holes drilled and tapped for a left, center, and right side mount. the ports are square metal tubing and nicely painted. they did remove nearly all of the welding splatter and shards, missed a few on the handle locking screws. its also a sharp opening with easy to get scratched on.started with a Virpil collective mount on the left, had to remove the left arm rest for the collective to clear the seat. the virpil mount BARELY cleared the left side mount screw. talking a few MM of clearance.just mounted a monster tech collective mount. far superior mount and i can properly position the collective now. getting a throttle soon as well so will have to swap back and forth between collective mounted and throttle mounted.otherwise chair is a bog standard racing style chair. not the best, not the worst.

I've tried multiple mounting setups for my hotas and this one is the most comfortable and convenient. It's not the most comfortable chair but as a secondary dedicated flight sim seat it works great. I mounted a usb hub to the arm so I only have one cable to plug in when i use it.

Quick shipping, early arrival, great product. I'm only docking you a star because the left mounting bracket receiving port for the insert for the throttle bracket was bent and did not fit upon arrival, however a little elbow grease and some help from a ball peen hammer fixed it right up no worries at all. Maybe was damaged during transport,not sure packages were sealed pretty tight. Anyway,great product for it's value,will purchase another in the future for my Co-pilot/Gunner.

first off I love this chair for many reasons yes I have a few problems with the chair nothing to really stop me from saying that i love the chair. so the one problem i have is it needs more padding in the seat and back my one problem not a hard fix the mounts were easy to install

There is so much junk out there that when you receive a product that someone actually put some thought into it’s quite refreshing these days. Product works very well plenty of adjustability for all of the controls.The ability to hand tighten everything allowed me to quickly get all the controls adjusted to the way I like to fly..Since I fly helicopters, it would be nice if there was a way to attach my collective on the lower right or left behind the armrest. Maybe in another version.Overall, very well done