BFT Mitto 2 B RCB Garage Door Remote Control, 433MHZ, 2 Channels for Rolling Mitto 2, Kleio, Ghibli, TRC 2 - Compatible With BFT Fob

I've got 14 of those for school staff. Easy to programme and battery hold forever on this model. Very pleased with purchase...

These worked well for us, the instructions were clear and worked first time.

Received on time, well packed. Instruction poor & reading requires a magnifying glass

I was a bit nervous to order in case it was not compatible and how to program, but this is extremely easy to program using your existing gate remote/fob and keep as spares.Step 11. Stand by the motor gate2. Press and hold the top 2 buttons on the EXISTING remote (you should see a light come on) and count to 2 and then release the 2 buttons.3. Then hold the open gate button on the EXISTING remote and count to 2 then release the button.Step 2Now do exactly the same thing on the NEW remote, as in:1. Press and hold the top 2 buttons on the NEW remote (you should see a light come on) and count to 2 then release the 2 buttons.2. Then hold the open gate button on the NEW remote and count to 2 then release the button.If you have multiple new remotes, just repeat the sequence in Step 2 on the NEW remotes, there is no need to do step 1 as long as you do it switfly one after the other. I programed 3 new fobs in less than 20 seconds.Finally, wait for 20 seconds after the last button press before testing the remote! This timer allows the remotes to come out of programming modes.Enjoy!

- Have just received this, it’s almost identical to the current BFT FOBs we have, except the coating is a bit more premium and has a nicer feel, along with the red LED being noticeably brighter.- In terms of range it’s perfect, at least matches my old one, perhaps can do better but have not tested.- Well-priced and neatly packaged in yellow envelope. Even comes with a small keyring on string- One thing I have done is replace the battery immediately, as the current battery seems unbranded/cheap, a bit flimsy and probably won’t last that long. I put in an energizer 23A which has never done me wrong.- Instructions with it weren’t clear but all it took was a quick YT tutorial.If you already have this same FOB or the 4 button equivalent all you have to do is:1. Hold both buttons on OLD remote briefly until LED comes on2. Press current open button on OLD remote.3. Hold both buttons on NEW remote until LED comes on4. Press button you want to use on NEW remote.All within a space of approx 10sVery easy, might take a couple attempts to get a hang of it.Older remotes have a ‘secret’ button rather than holding both buttons, again YouTube video by gateremotes.co.uk shows this across different types.If this doesn’t work, your gate may not be set up to be programmed. You’ll have to refer to manual/support re control panel. Note it appears you must first have a current working remote for this to work

OnlyOne of the fobs is not working. Can not be programmed.

Ordered to replace a lost one for my gate door, worked perfectly following the instructions on Amazon product description. Easy and quick.

Definite clone/ripoff ones, they are much cheaper quality than previous replacements I've bought for the same price. The buttons need to be pressed extra hard because it needs a little extra material added inside which I'm going to do myself; the plastic button needs to be longer to hit the tact switch correctly.But they still program and are still accepted by the gate so you get 3 stars rather than 0.