PLA 1.75mm 3D Printer Filament - 1kg (2.2 lbs) (Black)

I've tried several budget filament brands, but nothing quite meets the standard of AMZ3D so far. So far I am only printing in PLA so I cannot comment on their ABS, but the PLA is great - I've had no issues with the spools whatsoever. The diameter of the filament is consistent throughout the spool and I didn't have to change any settings from my other spools.Other brands have caused my nozzle to block on occasion but I haven't experienced this yet with an AMZ3D spool.They have a great selection of colours to choose from and so I decided to try this transparent blue. I was working on a project involving printing hex tiles for a table top game, and this filament makes for excellent water tiles! I highly recommend another of their colours - fluorescent green - for grassland tiles.Usually when I've used transparent colours in the past I wasn't too impressed with the end product, but the AMZ3D filament didn't disappoint at all. Prints well at 190C and the finished product looks great. I've now bought a spool of the transparent orange to try out next along with some of their regular black filament. I will review these once I have had the chance to use them as my printer is out of action until I have finished putting together my Lack enclosure. My next purchase from AMZ3D will probably be the wood or copper filament as I really want to try some of these more exotic filament varieties.Pros-------------------------- Great selection of colours, I highly recommend trying the transparent blue if you like the look of it.- Consistent filament diameter- Prints well at 190C- Cheap!!!Cons-------------------------I couldn't find a fault with this filament if I am totally honest. Especially at the price band.Review of the black & transparent orange filaments will be posted as soon as I have had a chance to test them.

Been using for years with different printers. No issues, my favorite brand.

I’ve used all kinds of filament from expensive to some £10 rolls.This seems the best in terms of quality and price.Only had a couple of failed prints but that was my fault in slicing.If your going to be finishing your print after with primer etc this is great for that.No stringing or strange smell which I’ve had from cheap ones.

The material is nice, and cheap, but the material is very brittle, and needs to be dried for hours before use.Do not leave this material longer than few hours outside as it will accumulate moisture, also it need to be printed on higher temps like 225 degress Celsius. rather than 195. If it bubbles and strings it means its moist and you need to dry it again.

I have owned a cr-10 since July 2017 and been printing constantly since. I have lost count of the amount of filament I have bought and used with varied success. I mostly print black as most stuff I print gets painted. Lately my prints had dropped in quality which I put down to the drop in temp and my printer prob needing a overhaul/service. Then I bought a roll of this... and now I am on my 4th roll. Yes it does come out a bit shiny but doesn’t bother me. No spool tangles so far. The quality of my prints is back up there with the best I have ever done. In the past I have been frustrated by filement brands I got to love either not having any stock or pumping their prices up. Happy to say AMZ3D prices haven’t moved for awhile and are very reasonable.In short. At this price u can afford to try a roll and see for yourself.Happy customer here

I am a 3D printing novice and picked up my first printer, the Creality Ender 5 Pro, last week. Since the included filament was junk decided to get something simple and relatively cheap so I don’t chew through good stuff while I’m learning. So far have had a number of successful prints with this stuff. The only upgrade made to my printer is a glass bed and at 75c, I didn’t have any trouble with adhesion with a brim type raft configured in Cura. I have the nozzle at 205c and haven’t had issues with clogging and is easy to remove from the Teflon Bowden tube fitted on this model. The benchy benchmark turned out well at 30% infill and 60mm/s print speed. I plan on getting more filament from this brand in the future and eventually venture to different filament types.

Been using this filament in black for years with no issue, this batch seems really bad just jams up my printer, taken the head apart now 4 times clearing it and trying to get it to print even at higher heat just is not melting as good as the last one I bought on the 4th may, going to send this one back and if the replacement does the same I will have to change filament brand

After 3 years of 3D printing i've settled on using AMZ3D filament when ever i can,I've not had any problems with PLA or PETG filaments from this company, i print with a prusa MK3 printer.I always make sure to buy only from this seller (HOWORLD), as i've heard rumours that there are counterfeit versions of this filament about sole by other people.It can be annoying at times when they are out of stock of a colour i need, but often i will wait for it to be back in stock, that's how much i like this filament brand.

Excellent product. Bought 50+ spools so far. Product is always available, never back order. Super fast and reliable delivery. Never got tangled. Consistent color. Easy to get great results. Prone to warping (large prints) and sensitive to moisture, so do your homework.

The media could not be loaded.

Printed great. Would buy it again

Looks good (unique color). The color was the reason that I bought it.

Selbes PLA in schwarz ist perfekt, dieses Silber ist aber eine Diva. Nur mit extrem viel Einstellung der Parameter halbwegs zu drucken.