20 Pack Plasterboard Fixings Screws Heavy Duty Self-Drill Plasterboard Wall Plug Professional Plasterboard Fixings Wall Plugs For Plasterboard Zinc Alloy Plasterboard Screws 32mm Wall Screws

I've used quite a variety of the plaster board raw plugs and I have to say, these are definitely the best. Easy to drive into the wall and very sturdy. Highly recommend.

As I held the cold, smooth metal wall plug between my fingers, I could already feel its weight and purpose. Each plug, crafted with precision, was designed to slip into the plasterboard, gripping tight once in place, creating a bond that wouldn’t waver. The fit was snug, firm, as I pressed it into the waiting hole—perfectly sized to meet its match in the soft embrace of the wall.Once inside, the plug expanded, anchoring itself deep, its body holding steady under pressure. The shelves, heavy with potential, hung effortlessly from the plugs, secure in their trust. No slipping, no shifting, just a solid, unwavering grip.The holes, drilled with care, were now perfectly filled, leaving the room looking clean, the lines between wall and plug almost seamless. With each installation, there was a thrill in knowing that these plugs, twenty of them in all, would hold everything in place—firm, reliable, and ready to bear the weight of anything I decided to place on my shelves.

Right price fast service

We have a few walls in our property that are plasterboard and I never am very confident when it comes to putting screws into them. I have used various types of special plasterboard 'plugs' and they do help but even then you are sometimes left with a less than secure fixing. With plasterboard being so soft it can be a challenge.This pack of 20 screws and 20 'plugs' arrive in a polythene bag and the cost being under £9 is fairly good value because the items are very tough indeed, being metal. The plasterboard screw plugs are quite large and initially I was thinking they might be difficult to work with. Actually they are extremely simple to fit. At the end of the plasterboard plug is a very sharp tip. This really 'gets into' the plasterboard very easily as initially it appears to 'carve' its way in. Then the very large threaded part pulls the plug into the plasterboard with nothing more than a cross-head screwdriver being needed. Literally within a few seconds the plug is screwed flush with the wall surface.The supplied screws are (obviously) sized to fit the plugs and the same screwdriver can get the screw into the plug. Job done. I was impressed that a single screwdriver was all that was needed.There are a couple of things worth mentioning though. The screws are a generous length and it should be remembered that the screws won't screw flush to the wall as they are longer than the plasterboard plug depth will allow. It really does depend on what you are using the fixings for. I would say that if what you are fixing is at least 1/2" thick then you'll have no problem at all. If what you are fixing is thinner than half an inch then the screw might not screw fully home. It's not a major issue, and all you would need is a shorter screw with a similar thread size. You can see from my photos what I mean - even fully tightened the screw head stands off from the wall surface.Another point worth mentioning is that when I fitted the pasterboard plug into a wall and had tightened it fairly firmly it provided a good firm fixing for the screw. However, when I tightened the screw into the plug, but then needed to untighten and remove the screw it was difficult to remove because the plug also started to unscrew itself from the plasterboard. With plasterboard being so soft that can cause the hole to become rather loose. Therefore I would suggest that it's best not to overly tighten the screw if you want to avoid the issue.Overall this is a good set of plasterboard fixings which will provide a good strong fix, and it can all be achieved with a single screwdriver. Just bear in mind the couple of points made in the above paragraphs.

Quick and easy better quality

Great for everyday plugs. They self tap too so no need for drills.

Totally value for money and great amount of screw fixing.Durability fantastic 👏🏾 👌🏾

Just brilliant for use on hollow doors. Without these the doors would not hold the screws (or the coat rail in my case) but with these very sturdy and can hold some reasonable weight. 10/10 for whoever invented these things.