YOOPAIDouble Side Textured PEI Sheet 235x235mm, Ender 3 Magnetic Build Plate Spring Steel Bed For Creality Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 S1/ Ender 3 Neo/Voxelab Aquila 3D Printer

I bought this for my Ender 3 Max as the glass bed just didn't want to adhere no matter how clean it was. I had an Ender 6 for a while that had a similar bed and had no adhesion problems at all using a similar cleaning regime so I can only think that the lack of an enclosure causes the issues.I have a Ender 3 pro with a similar build plate and it's a great upgrade over the standard build pad so thought I would put the same on the Max. Yes a glass plate gives a smoother finish but I quite like the texture this gives the surface and more importantly it sticks well.Fitting was simple, I removed the clips that held the glass plate on, cleaned the heat bed and put the adhesive magnetic sheet on. The glue allows you to reposition the magnetic sheet a couple of times until you have it spot on but does not come off once it is in use.Prints stick like the proverbial to a blanket and come off easily once the plate is cool, its nice and level too according to the bed visualiser in Octoprint.I will report back on longevity later but if its anything like the other one there should be no problems.

This is a MUST HAVE for making your life easier when frequently 3D printing.The bed adhesion is perfect and I’ve had absolutely no issues printing PLA at 200C and having the bed set to 50C.When the print finishes, it comes off of the bed incredibly easily, I barely have to flex the sheet or apply much pressure to the prints and they come off with no hassle. Even the thin clean lines leftover from the print come off with no hassle at all.The texture left behind from the print is beautiful. I use PLA and when the light hits it, it really shows a nice finish.

I use this with my Ender 3 v3 SE and it works great with it. I had issues with removing the models from the original build plate. No issues here, very easy to remove them. I'm very happy with it.I only encountered issue with adhesion once with "organic" support from Prusa Slicer. The support did not stick very well and came off, I'm not sure what happened there, but I printed several other models with support and had no issues.Overall I'd highly recommend it.

This arrived very well packed and protected with a bubble wrap sleeve. I purchased this for my Creality Ender 5 S1. Although this was not listed as compatible in the main text, one of the images does show it and the size dimensions were the same.Fitting is straight forward and I had no issues as a direct replacement. I found the adhesion good, but it does not have the really solid grip of the original Ender 5 S1 plate, which some do find too strong. The finish you get on parts that are touching the bed have a slight orange peel finish to them which is a minor point but may also be an issue if you are looking for a really smooth finish to a base of a print without sanding.I like that this is reversible so should you damage one surface or it get too worn you can reverse. Overall in my opinion this is a good replacement for the original plate, and the price was the best I could find for a replacement.

The Ender 3 Neo V2 comes with a truly hideous and coarse sandpaper style build plate that is just awful. I have no idea why they did that and made it so rough that it destroys the base of anything built on it. Then of course there is the nightmare of getting things off the plate once finished and cleaning the residue and bits left stuck into the surface. As I said, hideous thing.In the knowledge that somebody somewhere must have made an alternative I hit Amazon the day after getting the printer. Found these and ordered them. A very short while later they arrived and I replaced the default and awful default build sheet. Perfection. Smooth side, rough side so you have the option of how you want the underside of your model. They stick well, they warp easily to assist removal of the printed item and they clean easily. Why didn't they use something like this in the first place?Ah well, no matter. Everything is good now. These are a perfect replacement for the horrid thing they call a build plate on the Ender 3 NeoV2. And the best thing? You get a choice as to which side you want to use. Just remember, the smooth side is more likely to release the model while it is being printed, so make sure you have some extra-hold hairspray to make the surface a bit sticky. Hairspray being much easier to clean off than glue. Just don't spray the rough side, you don't need to.Money well spent on a well made and quality product to replace a piece of c**p that the original company used.

I have been making stuff in PETG recently on my Enders 3 Pro. This really works best at a temp of 80C which is a bit too hot for the the standard mat. Really good adhesion, and the quality of the base layer has been very good. Also final prints remove easily. No instructions for how to install, but it was simply removed the backing paper and attach to the bed. I also use the clips on the 4 corners for extra stability. Bed obviously needed re-levelling and offsets altered as it is a bit taller than the mat that came with the printer.

At first it seemed good, I was very impressed with it, but after around ten or so prints it is failing to hold the first layer, I have also tried my old go to Elnett hair spray, it lasted for two prints, applied more spray, didn’t stick, I then washed the plate in hot water with washing up liquid, but even that didn’t work, I tried Elmers glue stick, no luck.Others seem to have a good experience of the plate, so all I can assume is that there is a difference between batches, so poor quality control,So, I can’t recommend this build plate.

good PEI flexible sheet, fits well, has a smooth and a slighty rough side, i use a glue stick for the smooth side and i have very good results, the rough side isnt to bad and creates a nice alternative finish, very good product and a reasonable price

K so I spent 2 years fighting with my ender and various heads and hotends... now I order up a ~$30 replacement and keep it handy for when the previous dies... and instead of days or weeks these last months, though I'm printing much slower now.

Nie wiem kto wystawia pozytywne recenzje tej podkładce, ale zapewne ktoś kto nie miał do czynienia wcześniej z drukiem 3D. PET-G nie przykleja się do stołu, na oryginalnej podkładce coś takiego nie występuje. Z wydrukami PET-G na oryginalnej podkładce trzeba uważać, bo przyklejają się tak mocno, że można uszkodzić powierzchnię podkladki. W przypadku tej z oferty nie ma obaw, wydruki same odchodzą w trakcie drukowania. Testowane na temperaturach 60-80 stopni Celsjusza.

Me semble convenir pour l'impression 3D. Je ne l'ai toutefois pas encore employé. Prix ok.

Got what I needed

I bought this for my Sovol SV06+ as it was the correct bed size. However, the cutouts on the back of the plate do not match the Sovol SV06+ lug locations. The plate still works fine, it is just a few millimeter forward of its intended locations. Nice solid magnetic hold on the bed and easy print release.