Quik Lok BS/317 Low Profile Amplifier Double Brace Monitor Stand - Black

Glad that this allows me to angle the amps I use it for - including a Blackstar S1 45 and a Trace Acoustic. Also glad it gets the amps off the ground.

I really like this stand:-It comes folded and practically ready to use-It's sturdy, and light therefore easy to carry around (e.g. good for gigging).-The frame is designed in a way to keep the back of my Orange Crush 35RT amp open to receive cabling.N.B: This will also depend on the angle you set it at; refer to photos. At that angle there more than enough room to plug in the power cable however only just enough to receive the Channel Switch (Clean/Dirty) input jack. On my current setup the FX loop input/output are butting up against the frame so if you are using these you might have to shift the amp slightly to accommodate the jacks which could potentially cause balancing problems).-Last but not least it frees up much needed floor space in my room.Delivered promptly, thanks!

Only had this a few days, but seems to be a perfectly sturdy platform for my Princeton Reissue so far. Time will tell though!For those wondering about size, the Princeton is a compact amp (20x16x10 inches roughly), not sure I'd put something much bigger on this stand.Appeared to be the lowest profile solution, which is great for my small bedroom practice space. And there's zero assembly - set up in 30 seconds out of the box.

I use these for practice at home, and am pleased enough with them that i have 3.I have used them for Boss Katana artist and fender 68 custom deluxe reverb guitar amplifiers and Yamaha DXR12 active PA speakers in a monitor configuration. I can see that there might be an issue with the stand obstructing controls on the rear of the speaker/amp, or the open back of some amps, but this is not an issue with my equipment.Lifting the speaker/amp off the floor definitely improves the sound and therefore the stands are worth the relatively modest price. Using them at home for practice i think they will last for ever.A worthwhile purchase for me

Very sturdy stand, works very well with the Roland Blues Cube Stage 60w amp. The back rail does not interfere with the rear mounted sockets (power, line out, headphones, USB and channel switch) as it sits below them. However, the closer to vertical that one sets the amp to sit, the more unstable it could be - a generous knock from behind COULD tip it over. Having said that - if you want the amp to sit vertically, you might as well put it on a chair! Optimum positioning is when the amp is tilted back about 30° or more. Then it is very stable indeed. It also packs down flat, so takes up little room when being transported. Great piece of kit, highly recommended.

What a fabulous stand!! Fits my amplifier so well and looks great It is so neat in use with no sharp or loose ends protruding The amp feels so secure and the quick locking mechanism is very sturdy Once set it keeps the amp at whatever angle you choose and there is no wobble, it is rock solid! I am really delighted with the stand and my lovely custom amp is held safely and looks really good when set onto the stand Very highly recommended!

Does a great job angling my amp to my ears,not my ankles, easy to assemble & adjust, will get another.

This small stand is perfectly capable of holding my Vox AC15C1 combo. I should point out that the back support bar does get in the way of the power input, so I had to use quite an 'upward' facing angle to allow me to connect the kettle lead. This is not a problem for my setup, but might be an issue for other owners of this amp.

I have a few Quiklok guitar stands, and I have always been happy with their quality. I was considering this amp stand to get my circa '79 Princeton Reverb amp off the floor, but after reading the reviews regarding open-back amps I wasn't sure it would work. Took a chance, and the stand works perfectly with the Princeton Reverb. The back brace bar including end pieces is 20 inches. Also, the back bar hits below the input/outputs on the back of the amp, so no interference there. And build quality is consistent with my other Quiklok products.

Parfait stand d'ampli qui semble solide et dont l'inclinaison est variableCe dernier semble bien supporter le poids de mon Blackstar à lampes qui doit avoisiner les 30 kilos

Ottimo acquisto, per trasportabilità e resistenza. Unico difetto secondo me sono le parti terminali a contatto con la parte alta dell'ampli, un Marshall 65w con le cui dimensioni non resta perfettamente a contatto con le parti in gomma del sostegno.

Boa qualidade

Bestens, stabil, standsicher. Benutze ich für meine Ampeg PF-115HE Box mit Ampeg PF-500 fest montiert, selbst beica. 28 kg Gewicht und der Tiefe der Box alles sehr gut. Empfehlung, gerne wieder.