VICKJES Windshield Repair Kit, Glass Repair Fluid 4 Pcs Car Glass Repair Kit, Windshield Crack Repair Kit, Glass Repair Fluid Quick Fix for Chips, Cracks, Star-Shaped Crack

The "pressure" tube & plunger was leaky. So, it didn't apply pressure to liquid. The threading on the suction cup mount slipped. So, taction with the windshield couldn't be maintained. And, the silicon surface of the pressure tube was too small. So, liquid leaked out around the sides. This product was worse than zero value, because once the glue was set, the faulty repair prevented me from using another better designed kit. So, now I have to replace my windshield. This product should only be used for very small divots (5 mm or less) with no hairline cracks.

I had to do it twice, but it sealed my 1in crack in my windshield and it hasn’t gotten any bigger!

The media could not be loaded. It was impossible for me to seat the suction cups and insert the pressure cylinder. The threads didn’t start soon enough. I was already in the middle of the process, so I did the best I could. Once the liquid hardened, the rest was easy. Looks good, but the bracket made the process difficult.

I had a rain-x repair kit before and the tool was much better designed. This works, it’s just a hassle to get lined up and applied compared to the better tool.

this is SO cheapely made that the suction cups are pretty much useless (I clean them, tried wet, soapy, etc...). Just about eveytime I start tightening the insertion, 2 of the cups would loosen. First time I then tried to press the suction down again, I ended up putting too much pressure on the round inpact causing the crack to spider and extend out! exactly what I was trying to avoid!!!I JUST replaced a cracked windshield that spidered after some time and since I got a new impact again I figure I would fill it. Now the hole I can fill pretty good (after VERY CAREFULLY NOT PUTTING ANY PRESSURE) but the spider are almost impossible to fill now....Professional use a vacum instead of putting pressure and forcing the glue down - makes sense.THIS TOOL IS DANGEROUS and likely make it worse unless you ARE VERY VERY CAREFUL but then it barely works at best. waste of time and money...

Had a small bulls eye in the windshield so just bought this kit thinking all kits just resins. Had similar product in the past so it should an easy install. Followed instruction and at first it worked well. 2nd day going to work, at the end the work day found the bulls eye started a large crack that's about a foot long. Car is parked under some tree shade but probably the heat still ended up causing it to expand the resin at a different rate than the surrounding glass.Tldr : garbage product. Made bulls eye worse. Now I have to replace the entire glass

Oh my gosh, i am flabbergasted at how well this stuff worked! I had a rock hit my windshield and it started to “star”. I was so bemmed and figured there goes another $400 down the drain, I just happened to look this product up and figured it wouldn’t hurt to try it for that price. I am blown away at how well it worked! It is absolutely amazing! I highly recommend this product! Thanks SO much!

I purchase this to fix minor cracks and divots in my windshield. The suction cups don't hold and the applicator bracket is really flimsy. I followed the instruction but the results seem this had not affect. Lesson learned. I will just live with the windshield cosmetic issues until I decide to replace it.

Excelente producto para reparar vidrios solo hay que ver tutoriales para su aplicación ya que el instructivo que trae no viene claro