GratKit 8K Rigid Resin, 3D Printer 405nm UV-Curing Photopolymer Resin, High Precision Low Odor 3D Printing Resin，Compatible with 2K/4K/6K/8K/10K Resin 3D Printers - 1000g,Transparent

As my title says, I have an Anycubic Photon Mono. I haven't had to change the settings on it for any of the various brands I have bought and this one was no different. The quality looks as good as other brands like Anycubic and Sunlu. Can't wait to print more with this resin!

This resin caught me off guard to where I printed it with my normal print settings like the resin right before this one but just different brand.How it came out was this one was very hard. The supports too were harder to remove. Not sure why but it just did. The one before came out soft and the supports were easy to remove. Only difference was the other one was grey and this one is white.I printed some extra enlarged DND dice and had them cured. One of them was on the counter and I moved something where one of the dice went to the edge of the counter. I could have saved it but was thinking if it was so hard what would the 4ft drop do to the model. Would it survive the fall to the tile floor?It left the edge of the counter and must have hit on one of the corners of the dice and I heard something hit a box behind me. Well the sound showed me that it's not bullet proof.It was all intact but most of it was cracked and could see it. When I got to work I was thinking would it survive the roll?I rolled the non cracked dice and it hit a desk on the roll and did nothing. So I rolled the cracked one and it exploded.Well it does not survive a fall to tile but will survive a roll to a desk. I would imagine it too would have broke if it was a hard roll.Well there you have it. So another thing I noticed is after the cure it came out yellow just like the sun baked it and was only cured for 5 min. So weird.Well so here is the settings.Halot Lite printer.Base layers 45 sec by 4 layersRest layers at 4 secCreality 2 in 1 wash cure machine.Washed for 5 minCured for 5 min

This is a quality resin from a new brand I'm previously unfamiliar with, Gratkit. It comes in a convenient square bottle - it's not the same bottle that Sunlu uses, but it's a similar elongated concept that fits better on a shelf than Anycubic's round bottles. I tested it in black, and the pigment was a true black just like you'd expect.This resin printed well without me changing my usual settings, which was appreciated - dialing in a printer is a real challenge sometimes, so I liked that the characteristics of this resin matched other major brands, as it means I can take other factors into account like packaging and cost.I didn't notice a substantial difference in the hardness or brittleness of my prints compared to normal, but I also don't usually print with supports - most of my prints are simple mechanical parts that I stick right on the build plate for cost and time reasons.I like this product and would order it again if the price was right in the future.

Wow this stuff comes out with some serious depth of detail! Absolutely love how well (and dimensionally accurate!) my prints have come out - It’s an excellent quality resin and I was quite impressed how much it doesn’t have a strong odor when using! - I used a Resin Validation Matrix test print from Thingiverse, and after dialing in the settings, they were really quite close to my standard times! (Layer height makes a difference) - Cures and holds up well to handling! (Have not dropped a print yet to tell overall strength) - Ideal for an 8k printer, but even regular printers should still see nice quality from this! Hands down would get more! 10/10 a win!

all resins have smell even this one but it's not quite as strong as some of the ones that I've tried before I do a lot of printing in a very enclosure place and if something has too much of strong smell it's just not pleasant to be around so normally I'll start my print and Just close the door. this print fine I have no problems I went through a whole bottle I had I had to do a exposure test to dial that in at first And after that everything works great. Thank you

I was excited to use a clear resin that yielded better results without having to clear coat or varnish and was willing to pay the cost of admission. Sadly that didn't go as planned.The rooks are after cleaning the prints off in IPA as you normally would and they looked just as cloudy as any other clear resin I've used. I contacted the seller and the recommended not washing it and just curing instead. Over 30 minutes of curing it (2 mins, then 4, then 6 then 10 then 10) and it was still very clear but still tacky.The exact same results from resins at have the price point. It would be amazing if it worked for what I wanted but sadly it does not. I'm fine putting in the work to have clear final prints but there's no point in paying twice the price to do it.

Good quality prints when dialed properly and easy to work with. Price could come down some but its about standard for the higher end "known" resins I tend to use.

The media could not be loaded.  Resin works, and give really good result and it doesn't yellow. However you need to spray varnish over it after curing to get a clear result. The print will haze after washing and cure with alcohol , don't expect getting a good result of you don't post processing the print. Overall I am happy with the result.

Gratkit , a company established in 2020 and based in Shenzhen , China . Gratkit is a relatively new player in the 3D printing world, but they have already made a big impression with their resin lineup.Their Mission : Gratifying demand of smart manufacturing.This resin promises low odor, high detail , 8k resolution , and excellent results. I was eager to put it to the test. In this review, I'll be sharing my experience using the resin, including its ease of use, results, and overall value.Quality and Detail: One of the standout features of this resin is its high level of detail. I was really impressed by the intricate and precise prints I was able to produce using this resin with Elegoo Saturn 4K. The prints came out clean and sharp, with crisp edges and fine details.Low Odor: Another great feature of the Gratkit 8K Rigid resin is that it has a low odor. This is a huge plus for those who are sensitive to the strong chemical smell that some resins can produce. The low odor also made it easier for me to work with the resin without feeling any discomfort. The ventilation of my setup could be lowered in comparison of other resins on the market.Ease of Use: The resin was very easy to use. It came with gloves, detailed instructions, and recommended settings, so I was able to get started right away. The provided document was clear and comprehensive, making it simple to follow along and get the best results.Value: Given the high quality of the prints and the low odor of the resin, I feel that this resin offers excellent value for its price. It is competitively priced compared to other resins on the market, and I would definitely recommend it to anyone looking for a reliable and high-performing option.Conclusion: Overall, I was really impressed by the 8K Rigid resin from Gratkit. The company may be new, but they have already made a big impact in the 3D printing world with this excellent resin. Whether you are a beginner or an experienced 3D printer, I highly recommend giving this resin a try.

Resina de alta calidad y muy fácil de usar usada en mi Elegoo Saturn 3 12K logrando así sacar unos resultados con aún mas calidad que una resina standar ya que es una resina de calidad 8k, tiene bastante dureza a la vez que una buena flexibilidad, comparable a resina ABS, no he tenido ningún problema a usar mi configuración básica sin modificar ningún parámetro, punto positivo a mi gusto es la forma del bote, que la hace genial para manipularla y guardarla (comparado con los botes redondos tan grandes de otras marcas), en su caja incluye un par de guantes para su utilización y un folleto explicativo de sus diferentes gamas y sus características, muy recomendable tanto para gente experimentada como para gente qué acabe de comenzar.

The media could not be loaded.  Not brittle at all, prints excellently and is fairly rigid with a decent amount of flex. I'd compare it to most ABS-like resins I've used but for functional parts a little better. At £20/L it's currently good value too.It's a dark black but not as opaque as some. You'll need about 3mm thick parts to completely block light. Scratches a little easier than I'd hope.Apart from that perfect. Even made a quick replacement door handle which functions perfectly.

it prints okay but its not water washable like ellegoo