🔩 Bend it like a pro with VEVOR's Pipe Tube Bender!
The VEVOR Pipe Tube Bender is a manual tool designed for bending metal pipes ranging from 3/8" to 1" in diameter. It features 7 interchangeable bending dies, ergonomic design for comfortable use, and is constructed from durable carbon steel, making it ideal for both professional and DIY applications in various industries.
Manufacturer | VEVOR |
Part Number | Manual Pipe Tube Bender |
Item Weight | 50.6 pounds |
Product Dimensions | 19.1 x 5.5 x 5.5 inches |
Country of Origin | China |
Item model number | 3/8" to 1" OD 3/8" to 1" OD |
Color | Orange |
Style | 0-180° Bending Pipe Tube Bender |
Material | Carbon Steel |
Power Source | hand_powered |
Item Package Quantity | 1 |
Included Components | 1 x Manual Pipe Tube Bender, 1 x Instruction Manual, 7 x Tube Bender Dies, 7 x Rollers |
Batteries Required? | No |
M**N
Great bender with a few small flaws
For $120, this bender is awesome. I've made a few boat hand rails with it and it works great. It's not for the novice tubing bender, but if you have enough material to make mistakes; that's how you learn. It makes nice and smooth bends, but it does leave a devit where the clamp eye is. If they could re-engineer that clamp eye so it wouldn't leave a devit; this thing would be the biggest bang for the buck. I love it though. For my boat and the boats I work on (working fishing boats) it's perfect. Small dent in the bend doesn't matter. I've used it on 3/8 copper compressor tubing, 7/8 and 1" sst rail tubing for boat gunnels. For the 1" tubing, you'll need a long cheater bar, but the bender holds up. I put a pry bar in it to extend the handle 1.5' and that worked great to bend 1" sst. I'd definately buy it again, but hopefully i don't need to.
A**D
Works great.
Very nice I have no complaints. Is as listed
J**R
High quality
This is better quality than I needed or anticipated. I bought to try to make more consistent bends to my 0.25” round bar for wire frame Christmas light as I thought it would be faster and more consistent than my ring roller. It does work, but is overkill for my application. I do wish it had the ability for tighter/smaller radius bends. Not the tools fault though. A marker to show exactly where the bend would start would also be beneficial.
D**S
Save some money on plumbing fittings!!!
Most of the plumbing fittings are $$$ now.I use this product to bend some copper pipe 3/4 , not bad using this product for my 1st time ,tip -use some lubricant in order to make bends more smooth. I tried with pex too it's helps a lot if you need to bend some but pex is flexible is not going to keep the shape on a 90 degreeIt works great with hard pipe or copper pipe.
M**E
wrong parts shipped
Shipped with duplicate 22mm bending dies and no 25mm bending die so I can't use it on 1" OD pipe which is what I really needed it for. I have contacted Vevor they claim to have responded with a ticket # and information, but nothing is yet available. This will be returned if not rectified. It appears it should do the job with the right parts. Vevor customer service is an endless unproductive loop. I ended up returning it to Amazon. I hope the 2nd one has all the correct parts.
T**I
Catastrophic Failure
First thing is first, the cast metal die cracked on me and failed on the third tube that I tried to bend (1 inch stainless). Other things to note, the hole that holds the tube is generally oversized and allows the tube to sit at an angle when bending. Not a big issue for bends less than 180 degrees, but if you are looking for the full 180, this becomes a problem. If you're looking to be able to bend softer metals at angles of less than 150 degrees or so, this will be fine. If you want harder materials or larger tubes, spend a little more and get something better.
A**L
A bender for most occasions
Received the bender, and mounted it on a 2 x 6, lag bolted into the studs in the garage.I set-about a project that I had been postponing until this purchase arrived, and found it to be a solution to several different problems which I needed to solve.It is sturdy, and appears to be fit for long term, heavy duty use.NOTE: The photographs of this bender show the bender with the exchangeable radius forms installed upside-down. The square/rectangular protrusion in the casting is the stop which prevents the radius form from rotating. If used with the radius form installed as shown in the photos, you risk breaking a radius form when bending under extreme conditions,Additionally, you may find that you have to use some sand paper to remove the paint from the radius form pivot holes, before they will fit easily on the bender hub. A minute or two, with a piece of rolled-up 320 grit sand paper will do it for you, though--nothing to write home about.All-in-all, this will get quite a bit of use in the future days and months ahead.
M**J
Heavy duty parts
This is not a $600 tube bender but it does the job well. The tube does get a little marked up around the radius but can be buffed off. Definitely what I was looking for to make accessories for my truck on the weekends. It does need a solid base and requires a lot of force, maybe some lubrication on the tube would help. For attaching it I made a tow hitch mount. The starting point of the tube does get damaged on the eyelet-grip but you can account for that in your work excess. Definitely recommend for the weekend tinker.
Trustpilot
1 day ago
3 weeks ago