RollerexVXT500 85A Inline Skate Wheels (4-pack w/bearings, spacers & washers) (Size & Color Options) -Indoor Outdoor- Intended for Roller Blade Wheel Replacement (72mm, Steel Black)

I had a different purpose for these wheels. Used them in a motorcycle stand and replaced the hard plastic wheels. It was perfect and the price was great!

Nice set of wheels, not sure why they were only sold in sets of four. I like to replace all eight at the same time.Has included spacers and shims if needed. I only had to use the thin washers to keep the wheel from binding when tightened.The bearings are a snug fit - that's good, they really should be a press fit. I used a C-clamp to gently press the bearings into the wheels (see photo).The bearings spun free and quiet, and the wheel material seems tough - time and a lot of asphalt skating will tell if they're durable.

TLDR; If you need a sub-80mm size wheel pretty nice, bearings are just okI got these to use on a set of kids' skates that won't take a 80mm wheel, and the 72mm works just fine.After a few weeks of skating on cement and asphalt, the wheels are holding up as well as my other adult in-line wheels are.They roll well, hardness is accurateThat they have a decent tapered washer is a nice bonus if you need/can use them.The bearings IMHO are just ok. They work and roll smoothly, but they seem to have a little more resistance than some of my more expensive ABEC5 bearings do. Then again, we aren't talking about ABEC 7's and higher. <-- My kid doesn't notice it, but I do/didFor the wheel bearing combo, if getting the 80mm and you skate a lot I would go get bearing elsewhereThe wheels by themselves are nice...When you need/want a <78mm wheel as in my case w/ the 72mm, this is a reasonably priced set.They are far better wheels than came with the skates out of the box.If you want a set of wheels and bearings and do not want to put a lot of thought and effort into picking... this will get you by and make your kid happy to be skating again. If you are looking at larger sizes or are a more serious/hard core skater get the bare wheels and get a better set of bearing.

Product Reviewed: 4 pc skate wheel with bearings spacer & washers $28 minus $7 coupon.TL;DR; Good quality bearings and wheels; no instructions; some assembly requiredThese are intended for shop work not skates.Nice quality feel to these wheels. I had to press in the bearings and it took a moment to measure the stack up height to figure out the aluminum bushings are bearing spacers to prevent crushing the polymer hub by over tightening bolts. I don’t know what the small washers are for however possibly spacers to ensure clearance between the hub and skate body.I have not complaints on this product other than the lack of instructions that might save someone some grief. I used an arbor press to insert the bearings and some care needs to be taken so as not keep the bushings aligned with the through hold on the bearing inner race.$20 for 8 sealed bearings and 4 wheels is a good value.How I review:Reviews start with 5 stars and I subtract points.- 0 for value but I try to provide guidance-0.5 to -3 for product not matching description e.g. stainless steel is actually plated steel-0.5 to -3 for product missing badly on executionI select products carefully so low (1-3 scores) are rare but detailed comments and critiques almost always are in the review. Most of my reviews come out 4-5 range.If possible I dismantle or destroy items to examine inner workings.

These wheels looked fine. I'm sure they are fine for rollerblading. I typed in my search bar for ripstick wheels for my kids. I installed these but they only lasted a few minutes. I'll do better research next time before ordering.

I ordered these for my sons inline skates. So far they are working perfectly. Will update if any issues.

My boyfriend loves to rollarblade but his current blades wheels have become so run down that it's not safe for him to go out. I got him these wheels as a test run to see if they'd fit his blades, and they did! It's color is vibrant and they're brand spankin' new. This is a set of 4 wheels so they only did 1 boot, but that's okay we'll get more.They don't come with axels or ball bearings so be aware of that! These are just the wheels, so if you're new to blading and looking for wheels for your boots, be aware that it takes more than some brand new wheels to start skating

These wheel are a good replacement and upgrade from the default factory skate wheels. These are sets of 4 and come with bearings and spacers... but no instructions...Main complaint is that there are no assembly instructions or diagrams. I had to lookup a video online to see how to install the spacers. The bearings are press fit and, at first, I thought I was doing something wrong because it's so hard to install these.Once I saw that I wasn't doing anything wrong, I was able to complete installation.With the bearings, spacers and washers in place, I can say that these wheels are very smooth.